- 4V engine builders- help!
- Too much backlash???
- Functional Hood Vents
- Ported Heads
- 4V Head Question
- The "Sheffield Cooling Mod"
- cammed 01 cobra
- Wahoo, just ordered Sullivan intake
- Head,cam,milling heads?
- Iron block or Aluminum block
- Sct Maf
- Why not increase Static Compression Ratio
- Weird Cooling problem
- what do you guys think?
- Who knows about gapping rings for a blower car?
- Car running really rich???
- Engine work in Southeast?
- Diablosport Predator vs. SCT xcalibrator for tuning
- Going FAST-Use stock harness or Painless?
- crate engines
- Road racers, brake&tire ????
- want to talk to the owners of mid 11 n/a 96-98 cobra
- Any 99-01 Cobra running the Terminator clutch kit
- '93 MarkVIII motor help
- Would this combo work?
- 4.6 Aluminum "Mountain" Block has arrived!
- spark plug gap on procharged cobra
- Hello everyone! I'm new here. First question.
- Exhuast porting Valve guides ??
- newbie with a question
- Live Axle Swap Q's
- 4.6 4v Supercharger
- MMR Street/Racing Oil Pump
- GT gaskest on Navi heads.
- Navi heads (L&R) have the same casting number?
- What is involved?
- Aussie 5.4 pics
- this is no bullsh...
- Spitting/burning oil after CAI and Header Install
- pro m maf
- Tooling for 4V CAM Installation
- 4V Engine Build-up
- Tires ??
- DOHC swap hey guys : )
- Carbed DOHC 5.4 at KarKraft!
- Knocking On Cold Start-Up
- 4v Procharger owner please give your opinion..
- How much timing does the EEC V add @ WOT......
- Am I crazy to want to build a 4V shortblock myself??
- Question on Cobra Crank......
- Heads, Heads, and More Heads O.o
- fast tuners???
- 5.4 dohc intake question
- Billet Rods - Oliver or Manley
- What parts should be cryo'd?
- Aviator intake?
- LDC Cooling Mod for ALL 4v's!! (Not just Cobras)
- Where to find Lash Shims?
- Revving a Cast Crank
- Endura-Tech Race Springs Setup.....
- N/A intake for 01 cobra
- Car Whisteling
- 5.4L DOHC Valvetrain
- FMS HD 31 Spline Axles
- 11.5:1 compretion how to ?
- Stroked
- loss of power at 5k rpm ???
- 1997 Cobra ECU pinout ?
- Roll Bar Help----inside
- PTV Clearance With FR500 Valvetrain and Flat tops.