- Will I GAIN or LOSE torque?
- UPR short belt kit
- Any news on the B-headed Sullivan intake???
- Terminated 97 Cobra UPDATE!!!
- 4.10 Gears Or 4.30 Gears for this? Stop and Pass/Roll!
- Engine computer for 5.4 32v Navi supercharged/nitrous
- Those with line lock. Question, please help.
- Clutch issues solved! Centerforce saves the day
- 2000 cobra R heads vs. 03-04 cobra heads
- Looking for pistons.
- Another 4.6 intake besides sullivan and fr500
- IMRC cables.......
- Strange Noise/smell
- Need advice quick please. (04' cobra)
- Alternator Issues?
- Input shaft for 99 cobra tranny?
- 97 Continental Block
- problem with No Limit race cars, help!
- Cam spring shims?
- Anyone using an ACCEL Gen 7 DFI
- new best!!!!!!!
- Pistons
- Mark viii heads and 03 lower
- Fuel Pressure on a 97 Cobra
- Guys I need your help again.
- Using/Burning Oil
- Performance Coil on Plug Coil Packs!!
- please help
- Why need LDC or Apten Cooling mod???
- Got a 8.78@162 out of the 284 on BFG's
- Best 4.6 shortblock for 04 Cobra?
- 500 Rwhp N-a
- late & early valve cover gasket seal-same?
- 4v Heads on 2v Block?
- Need help choosing 4v heads.
- Need TSB help
- Alternatives to the metal coolant tubes on a 4V???
- Any other intake elbows work on Sullivan 4.6 intake?
- Mod Motor Won't Run
- Anyone know a good auto trans guy around Bham, AL??
- Idle issue
- 03 Cobra Oil Pump Gears...
- Lincoln Continental Heads? any difference?
- are the 99+ heads all the same?
- No Voltage to Fan
- 00 cobra block 03/04 heads and blower
- $20 A/C delete and short belt mod
- Newbie here - have a rim question.
- Paint code for Cervini's "C-Series" Eleanor Look alike
- Plug PS ports on the hydraboost and keep power brakes?
- Fan ON with ignition OFF
- How much power/(sc)boost with flat tops?
- What year Navi heads are best
- suggestions and help
- throttle body for Sullivan 4.6 intake
- *sigh* Puff of smoke returns.
- Exhaust Question
- 15" wheels on a 98 cobra? possible?
- Wiring up a warning light for an EWP?
- camshaft "drag" (for anyone who has installed 4V cams)
- Are Aviator cams/springs/valves identical to the Mach 1?
- ok guys a 4v noob in here.
- 4v wiring question
- What's this knocking in my motor?
- Pulley Upgrade Question
- Want some input on a build-up
- stock 03 cobra short block
- building a 4v motor
- 4v transplants
- 2+ years in the making, Brandon's Alsept's P/S ride is close to completion