Forum: Mustang Pictures

http://www.youtube.com/watch?v=WDUFK3NwDb0

Got tired of the stock power of the 2V so I started looking around for different cars (cobras, corvette's, etc.) then soon realized, why not go for some crazy numbers with the little 2V? Never really seen too many built 2V's in California especially without a stroker so i figured what the hell. I...

So over the past week and a half I went and picked up/dropped off a bunch of parts from two different coaters. First off was my hot side turbo stuff that I had ceramic coated, and even though it won't be seen, it looks awesome! I only unwrapped a few of them. ...

Here's the video from my last outting. When reviewing datalog noticed car was shifting at 6300 and at 6455, way past my powerband . I already made corrections on the shift points and the tune also pulled 10* of timing. Notice when the converter locks up almost at the end , so it leads me to...

Buffed and waxed the car, took the seats out and shampood the carpets, and just gave her a really good cleaning: http://i19.photobucket.com/albums/b194/rich1034/IMG00027-20100821-1206.jpg

:censored: When you think of racing…. What videos or pics immediately come to your mind? I am very curious to see some of the best and most memorable races out there!!! “POST THEM UP!!!” WARNING:

Ok first off I know it's a V6 and it's not Modular... yet, but I'd thought I would share till it is. Specs Engine .030" Overbored 01' Block (fully machined) 95 Forged SuperCoupe Crankshaft Eagle H-beam Rods 6.090 JE Pistons Custom My Specs Comp Camshaft (218/226 540/540 112LSA) DIY P&P...

snapped a few a couple of days ago... http://img.photobucket.com/albums/v449/gpradzin/IMG_9646.jpg http://img.photobucket.com/albums/v449/gpradzin/IMG_9656.jpg http://img.photobucket.com/albums/v449/gpradzin/IMG_9664.jpg http://img.photobucket.com/albums/v449/gpradzin/newIMG_9577.jpg

Well this was my first time testing out my new 15" rim and tire setup on the Boss, did ok not as good as I hopped... but hey oh well I recommend trying to skip ahead of these vids, on one video you have to wait over 5 minutes till the race... sorry unedited First run of the Day Vs Bolt on...

Local Mustang Meet and my car wasn't in pieces like usual. So..... http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs142.ash2/40416_459201773823_642923823_6416095_6586608_n.jpg

This was all after mustang alley weekend at Somernites Cruise in Somerset, KY. --------------- Me vs C5 1st run vette on motor 45 -trap speed (120) 2nd run vette on motor 45 - 120 3rd run vette on nitrous, cobra iced down before run. 25 - trap (120) vette missed 2nd 4th...

Small show with a modest turnout. Not their big annual show, plus a lot of shops in So Cal have had dyno days of late, or are about to. Still, you can’t beat a full day of looking at cars, watching pulls, and pizza! Pics for now, and a couple vids to come of the runs plus results as soon as I...

Check out the video's!! http://www.youtube.com/tascamodshop#p/u/0/L-uoGCLzHVs

Yellow Mustang Registry was in town for the Charlotte Autofair, so we invited them over for free food, music and fun at our new shop. Here's a few photos of the fun. http://www.shraderperformance.com/shop/ymr/ymrshop1.jpg http://www.shraderperformance.com/shop/ymr/ymrshop2.jpg ...

http://www.youtube.com/watch?v=Kqgh-oRi6fk first runs against the fox all from about 40, the only other car on the high way kept getting in the way. this fox has run high 9s but says he had his 10.60 tune in it. next were against the built motor whippled lightning says it made 700 ...

Here is my first video and it is of my cobra and my brothers subaru. I made it pretty quick but i thought it turned out pretty nice. Tell me what you guys think.:salut: YouTube- ‪Sick Cobra and Subaru Video‬‎

Today, I went to the track with our 2011 Mustang GT auto. I got in the car, drove 40 miles to the track, went to the staging lanes right off the street, and made 3 hotlap passes within 20 minutes, and drove 40 miles home. Only new mod was our aluminum 1-piece driveshaft. Previous mods were...

After seeing the GT800R we built for a customer in Massachusetts, we had a customer approach us about building a GT1000R. It has a very long list of mods, and would probably be easier to say what wasn't modified, but it is powered by a Livernois built big bore GT wet sump aluminum block, CNC heads,...