Eaton Cobras VS whipple ,KB cobra racing

[Z-eater]

Has anyone beat whipple or KB cobra with their Eaton cobras?
I raced my friends whipple cobra last saturday night, we went twice from 20mph and it was over fast since he couldnt get traction. So i did him a favor and went from 40mph and we were side by side until about 100mph and I pulled him by 1car and he let off.
i raced another cobra same night with 6lb lower 2.93 upper and ported eaton from 50 mph and got him on top by 2 cars.

My mods are 2lb lower 2.76 upper stage 4 ported eaton, Auto with 3800 stall, solid axle with 3:73 gears. and prostars. I couldnt believe that this is happening since I m racing them from roll.
My goal is to run 9s with eaton.
I have never dyoned my car. Cant wait to put bottle on the car soon.

whipple cobra dyoned 603/570
other cobra put down 535.575

my old 03 had 2.80 pulley with 100 shot and this cobra pulls just like my old one.

[Hollowtip429]

Interested in seeing the responses. I'm sure others have beaten KB/whipple cars. All kinds of factors, traction, driver mod, and endless others. Good job on beating them though!

[SilverBoost]

interesting....got vids? Do you have a lot of weight reductions? Great racing it sounds like!

[VENOMOUS03COBRA]

it all depends on the driver. i ran 10.90 @128.38 with my eaton at over 3800#s. with only 15.5#s of boost, which is enough to beat ALOT of the twin screws running around.

but a twin screw running around with 600+ rwhp , SHOULD be able to go faster , but it doesnt always work out that way, lol.

[GodStang]

My buddy beat a 2.8LH KB Cobra with a 302 Stroker and stage III cams. His only mods were JLT CAI and had 2 cats removed. I will find the video.

The camera is IN THE KB COBRA

http://videos.streetfire.net/video/9...ea0169e745.htm

[Z-eater]

interesting....got vids? Do you have a lot of weight reductions? Great racing it sounds like!

I do have a Video racing whipple cobra but someone else record it from another car. I will try to get it posted tomorrow.

no wieight reduction. whipple cobra pulled my by 1/2 car in second but when he shifted I came back same in 3rd than I locked my converter on top and slowly pulled on him.

[Z-eater]

it all depends on the driver. i ran 10.90 @128.38 with my eaton at over 3800#s. with only 15.5#s of boost, which is enough to beat ALOT of the twin screws running around.

but a twin screw running around with 600+ rwhp , SHOULD be able to go faster , but it doesnt always work out that way, lol.

nice numbers in sig. did you ran that with 6-speed? I m hoping to get close to 9s with bottle.

[VENOMOUS03COBRA]

nice numbers in sig. did you ran that with 6-speed? I m hoping to get close to 9s with bottle.

thanx bro, yea the car weighed well over 3800#s, and had irs and 6 speed. 110% factory stock suspension.

heres an in car video of the run.

http://videos.streetfire.net/video/c...1b371025d8.htm

with the auto, you definately have a good chance. i know someone that has done it.