03 Cobra

[jeckeler]

This is just to gauge interest. I will entertain serious offers.

List of Parts that could be yours.

3.4 Whipple with HPP Modified inlet. $3400, Less than 20 miles. All Dyno and track Time. Made 720Hp to the tires on slicks.

Metco x10 Kit. 6lb lower. 3.5 Whipple upper with 3.7 +3.5 alt pulley $1000

Kooks Stainless 1 5/8" headers with 2.5" x Pipe and 3" shorty cat back $850

Dynamic Mighty Mite C4 trans for Mod Motor (less than 15 passes on it since fresh Fluid changed religiously) reverse manual valve body with trans brake , B&M hammer shifter, Neal chance converter, Drive shaft $3200

03 Cobra Blower setup minus blower, Lower intake, intercooler, Heat exchanger, pump, oil cooler, coolant hoses and pipes, Front cover stock lower pulley setup and stock idlers $1500

Polished CPR Fuel Rails $200

RC 75lb High Imp Injectors $575

LFP TB $300

4.5" Aluminum intake for big blower with filter $200

10 Gallon water tank with -12 fittings live well lid, insulated, 2 mezeire 20gph water pumps with hose for trunk mount $350

Low 9 second setup.. need to tweak the converter and gearing and it should run with the fastest in a lightened car. Full weight cobra, AC, Power steering, stereo leather seats, solid rear axle car with 3.73s = 1.3x 60' and 6.0x. Nothing is wrong with the car or any part. I am At the point of my winter upgrades and I am contemplating selling the parts to start a turbo project.

Please PM me only

http://s128.photobucket.com/albums/p...rent=dyno1.flv

http://videos.streetfire.net/video/m...bra_197532.htm

Thanks

Mike