Hellion Single 76mm, .81 a/r ball bearing turbo kit.
This is my dyno vid. there are only a few pulls on here. WE made 8 pulls total. The last pull you will hear the dyno operator mention something about the blow off valve and Jon Lund say something about the intake temps going up. turns out my IAT1 blew out of the intake tube causing the pressure release the operator heard and the sensor dropped close to the passenger side head and header which is the temp increase Jon saw. I am the one driving the car.
Right Click, Save As
This is the first track visit I made with the turbo. you can see the learning process with the 2-step and notice the shifting difference from on the track and on the street. I think my clutch assembly is heating up or something is happening at the track. hope to have that solved soon.
Right Click, Save As
Turbo Terminator Videos
Linear Mode
