Type: Posts; User: Jerry1200; Keyword(s):
Search: Search took 0.04 seconds.
05-16-2019, 10:36 PM
Ed to be honest after all this time since I first read about the #5 full flange upper in a thread from years back I think that was started by a guy named Rtusnake (not sure), I have seriously...
05-16-2019, 09:50 PM
Tony is your car the black turbo car running low 8's in a vid on Jake's youtube channel? its an old vid.
Ok back to the bearing talk, I have no doubt about your experience and what you are...
05-16-2019, 01:48 PM
Right, that is the si part number, I was told to go with the coated XP bearings.
05-16-2019, 12:06 PM
I talked to a guy over at King a few weeks ago and he said they no longer offer the main bearing set that has the fully flanged #5 bearing.
I need to get this figured out real soon. Both my engine...
05-16-2019, 11:54 AM
This thread was kind of misleading because I got my car running back in Oct but that was only with a stock short block. I got bite by the SCT EPA Bullsh** My tuner couldnt tune my car, wasted many...
03-16-2019, 12:09 AM
Yep, All that EPA Jargin = my car sitting at the tuner for the last 2.5 months and Not being able to be tuned. Brought it back home & my sct flash tuner is out in front of my house in the garbage...
Yes I run an ATI Dampener, Its a badass looking piece, They have them both for Stock Pulley cages and Metco crank pulleys. I'll soon have both LOL. The ATI is a two piece setup, two part numbers,...
10-09-2018, 12:07 AM
Its been months but Its finally Runs, started 2 weeks ago!! Car sounds pissed! I'll try to post a video. I'm still running the Ford GT SC cams like I had before with my 570rwhp eaton setup, but it...
Probably a dumb question but are the Stage 8 locking header bolts still the best fastener available? Just wanted to check with you guys, never know when something better is gonna comes out.
08-24-2018, 04:50 PM
Well I got lucky, it took all these tools and all 215lbs of my body weight pushing on a double wrench to get this out. I cut some of...
I like this thread, good info here ITSTOCK, I gotta try you settings next time.
Hey Ed Hope you are well, Joe at Kicaid told me to charge more on the high side, He also said that having to much...
08-23-2018, 08:48 PM
This is the second set of long tubes I myself put on this car. Had no problems installing either set or removing the last set. I remember when I took the older set of kooks long tubes off to...
So Im at this point, got that Ic manifold from Justin Wheeler, Had this Blower on and off about 4 times now, So I'm about to finish up...
Now thats what I'm talking about!! That's real in the trenches R&D info, Thank You!
1. Not a show piece, I have local Ls1 smack talkers to beat.
Well I have an ARP crank bolt, I know that aint...
Hey bro like Ed says, just take it easy you don't need much, my advice forget the torque wrench, ya gotta feel it, Ive been doing it that way for 20 years, I also have the stupid 4 thread heads and...
well God bless the internet, a quick search and I find other threads on this.
I hope it was ok that...
Hey Ed I emailed you a photo, when looking at the picture you posted it is the one on the right side, second from the back. Also would love to hear someone else that has or had a Whipple 4.0 confirm...
Ok I got it on last night, but this Blower definitely presents a whole bunch of difficult challenges. As many have stated the "just go turbo" remark, I chose this blower because I wanted to just...
All agreed Ed, My other vice is being a gym rat and still there is no way i'd do this by hand. Once you move that kind of weight that far away from your body all the stress is on the lower back and...
Crazy Coincidence to see this thread when I was just about to start my own whipple 4.0 install thread today.
Up late last night trying to squeeze this fat boy in there and I couldn't get it in. ...
04-02-2018, 12:10 AM
Man what the H have I been doing all these months, My apologies to you guys, no time for long stories lets just say life happens.
So Ive been back at it, setting up to degree the cams. Of course...
Ed's directions are spot on for form taping the cams for 12 ARP bolts, mine turned out perfect!
10-17-2017, 09:58 PM
When I was a kid I wanted to play ice hockey, I couldnt play because mom & dad didnt have money for skates & gear. after 2 years of me begging they let me play. My old man bought me a pair of used...
10-17-2017, 04:36 PM
I believe the gain you speak of with the 98 cbra cams. I paid $350 for brand new GT SC cams back in 2008, no loss there. Its Nothing compared to the $1800 I just spent for comp cams with spring &...
10-17-2017, 04:20 PM
OhkeyDoke I'm gonna have to step in here and start replying to this thread before I get too far behind.
First off no one ever said the stock 03-04 cobra cams are the best cams in the world, and no...
10-15-2017, 06:31 PM
Crank timing chain sprocket ??
Cloyes is on the left, Stock is on the...
10-15-2017, 06:19 PM
Awesome information Ed, love the BHJ write up. I used an ATI on a foxbody T trim vortech pushrod set up, then switched to a lighter BHJ when my motor was internally balanced and I was then running a...
10-15-2017, 05:48 PM
Yes it is possible to change the oil pump without dropping the oil pan, just need a little 8mm wrench for the pickup and a lot of patience.
10-14-2017, 07:24 PM
Gents lets talk crank balancers/dampners. I'm in that "well might as well do it while its apart" sort of mindset. My thinking is that with the amount of stress a whipple 4L will put on my stock...
10-12-2017, 09:29 PM
Hey guys, been a while, I'm still waiting for the machine shop to thread my GT cams for 12mm bolts, should have them any day now. In the mean time I ordered an oil pump from Boundry, showed up in 2...
09-23-2017, 07:33 PM
Instead of having this decorate my living room for the last month, I should of just slapped this thing on the top and not touched...
09-23-2017, 06:53 PM
Many reasons broski,
1. Power isn't a problem with this setup, how to turn it way down and not blow my **** up is more the problem. How do I only make 23 lbs and no more then 850whp with my setup...
09-23-2017, 02:54 PM
Brand new Comp cams, only put them in the passenger side before I had the Ed wake up call.
09-23-2017, 02:37 PM
Well I'll be damned it worked!!
So these are my cam bolts, easy to see the factory bolt stretched real bad.
I'll try to post some...
09-23-2017, 02:17 PM
- - - Updated - - -
well dropbox links doesnt work for pictures :no:
09-22-2017, 10:38 PM
Ed You hit the nail right square, Ive had the Ford GT super car cams in my car for a few years now, very recently took them out to do different cams, basically because (to keep it clean) I am not a...
09-22-2017, 02:56 PM
I had the pleasure of speaking with "The Man" last night for a good while, Ed gave me a real schooling on the cams and how they work in these motors. Ed I cant thank you enough for taking so much of...
09-19-2017, 11:47 PM
Can't thank you enough for this info Ed!! I will need a few to digest it all. Lately Ive had little time to wrench on it, these are my busiest months at work, but I should be into the cam degreeing...
09-01-2017, 07:41 PM
Ed, I understand the idea of cam companies wanting to make money and sell cams that sound good, but from where I'm sitting the fact that there is No mention of difference between sound and...
08-29-2017, 04:50 PM
Damn, wasted money.. I had a bad coil years back, bought this cheap Accel 8 pack from Auto zone, those turned out to be the biggest pos and then I was buying off brand coils replacing them here and...
Results 1 to 40 of 49