Mustang and Ford Performance Forums banner
blower
1-19 of 21 Results
  1. Power Adders
    Has about 10k miles on it. Includes Blower, lower intake, plastic IMRC deletes. Balancer, and 2 pulleys. Fits 96-98 cobras or other B heads. 3000$ for everything. Will post more pics later.
  2. 1996 - 2004 Mustang GT
    It appears that my belt alignment is off. It looks like the Vortech blower pulley is sitting too far in/out towards the motor. What determines how far onto the shaft the pulley sits? Could I use a washer between the pulley bolt and the pulley to space it inward? Suggestions? Thanks.
  3. 1996-2004 Mustang Classifieds
    SOLD!!! Blower has about 10k miles on it. Current pulley is for 7-9psi. On my car with all the bolt-ons, I made 401/398 at the wheels on a Mustang dyno. Going back to N/A so I don't need it anymore. You will also get the intake pipe, fender-well mounting bracket for air filter, discharge...
  4. Engine Parts
    Vortech V3-SQ w/ belt, mounting bracket, bolts, discharge pipe. Blower has about 10k miles on it. Current pulley is for 7-9psi. On my car with all the bolt-ons, I made 401/398 at the wheels on a Mustang dyno. Going back to N/A so I don't need it anymore. Pics upon request. $2,000 obo.
  5. Power Adders
    for sale: procharger 4V cog kit! it is currently adapted to fit a 2V so it will fit both 4 valve and 2 valve set ups. also comes with procharger open race by pass valve. also have spare gates GT2 belts and extra cogs for more boost if you are staying with the cog set up! I am giving this kit...
  6. Engine Parts
    HPP Billet Blower cams. No need for Shims. .474" lift 282* duration 114 ls. Ran one season. 130 passes 20 dyno pulls. Made 720 hp with a conservative tune through a C4. $1100 + ship PayPal= 3% PM me please. Mike
  7. 2003 - 2004 SVT Mustang Cobra
    Ok iv looked over cobrabob's belt selection like 10 times now but I can't find the right size belt for what I have. I have 2.8 upper, 4lb lower, 3 piece idlers 2-100mm and 1-90mm, and 3.2 alternator pulley. Since they're like 50 bucks I wanna buy the right size the first time.. Anyone have that...
  8. Power Adders
    What I have here for sale Procharger D1SC - Polished Mach 1 Bracket Piping Procharger Intercooler SCT BA2400 MAF Vortech Mondo BOV Reichard Racing 3.5 inch 8 rib pulley Procharger 4 inch 6 rib pulley SVT Focus Fuel Pump 42lb Green Top injectors Price for everything is $2500 or will split up...
  9. Vehicles
    This is just currently a feeler ad. Im currently deployed and the pictures that i have are from before i left, the car is currently being repainted, (only because i bought a new hood and DSG is hard to match so the whole car was scuffed up to be painted and re-cleared) From the previous owner i...
  10. Engine Parts
    I'm selling a set of Comp Cams 3v Stage 2 blower cams. Was told they have less than 3000 miles on them. They look good, but I still sent them to machine shop to polish the journals so they are like new again. Asking $500. Cams are $700 new. May also trade for good forged crank for factory...
  11. Power Adders
    Eaton blower with new 2.76 pulley blower had around 24k- 28k miles. PM me if you are interested i have video's of it in perfect working order. Blower pulley is not damaged and has no dents at all. Blower oil was changed around 20k miles. Plenty of teflon still on the rotors. Buyer pays for...
  12. Engine Parts
    I need a set of DOHC 97 Cobra cams or a good Set of Blower cams. Let me know what you have.
  13. Engine Parts
    I am looking for a set of 4v blower cams or a set of 97 cobra cams. Let me know what you have. Thanks, Jay
  14. Vehicles
    "GRN 00 GT" is for sale. 2000 Mustang GT 4.6L SOHC 6 speed Saleen Supercharged. Some of the pictures are old, the top 2 pictures are the newest and were taken in August/Sept 2009. pm me or email what you want pictures of, it would only allow me to upload 6 pictures, so I tried to include what...
  15. Power Adders
    Still on the car, debating on selling, if I can get the right money for it, I will go ahead and pull it and sell it. Will also consider trading for SVO intake setup & cash. SVO/Roush Eaton M112 Supercharger Kit, has stock 6LB 3.5 Pulley on it, and has NEVER had a more aggressive pulley on it...
  16. 1996 - 2004 Mustang GT
    Just bought a 98 GT with an SVO Supercharger, SVO Heads, PI Cams, FMS Shorty Headers, Bassani Catted X Pipe, and Roush Side Exhaust setup. It doesnt make full boost as soon as you hit it, and has a momentary lag, so Im not sure if the belt is slipping off the hit or not (although my experience...
  17. Engine Parts
    Built BY Houston Performance - Freshly Machined - 4.6 2v Windsor Block Torque Plate Bored & Honed Balanced and Blue Printed FRPP Hi-Volume Oil Pump JE Forged Custom Stroker (.030 Over) spherical -2.75 dish pistons Federal Mogul race bearings File fit JE Ring Set Eagle H-Beam forged...
  18. 2005 - 2010 Mustang GT
    It has come to our attention that there is a hype surrounding the new Edelbrock 2.3 E-Force supercharger. Edelbrock has come to us to test the power and prove the numbers for their supposed bad ass supercharger. So we are looking for a test mule to slap this thing on and put down some numbers on...
  19. Oklahoma
    CUSTOM 4.6l Stroker Shortblock Built BY Houston Performance - Freshly Machined - 4.6 2v Windsor Block Torque Plate Bored & Honed Balanced and Blue Printed FRPP Hi-Volume Oil Pump JE Forged Custom Stroker (.030 Over) spherical -2.75 dish pistons Federal Mogul race bearings File fit JE...
1-19 of 21 Results
Top