Mustang and Ford Performance Forums banner

comp cams

  1. 1996 - 2004 Mustang GT
    Does anyone have the screw dimensions for the adjustable gear? Long story short, Fidanza makes the wheels for Comp Cams. Comp has to contact Fidanza to get the specs. I'm trying to get a car straightened out for the NMRA finals. It has the oh so common P0340 code. Fidanza states they "never...
  2. Engine Parts
    Comp Cams XE278AH set for 99 - 04 2v engines. Comes with springs. All items are still in the boxes and have never been used. $500 + shipping
  3. Engine Parts
    hi i have a set (both), comp cams XE270AH-13 and red Aeromotive fuel rails for a 99-04 lightning and an afco dual pass heat exchanger. I dont have the truck anymore and now i'm trying to get the stuff out of the garage everything is brand new and never been used. i just do not have the original...
  4. 1996 - 2004 Mustang GT
    Ok so i put stage 2 hitech cams and a stall conveter on my car this last winter, but recently it dropped a valve and i really dont know why. When I took the motor apart the cam sprocket was loose and it have a chunk missing on the inner side and the cam keyways looked spread a little. So what...
  5. Engine Parts
    Comp Cams XE270AH 2V cams for 4.6 5.4. These have NEW Ford sprockets and bolts, torqued and ready to go. Looking for $550 shipped. I have pics but don't know how to upload here. Email [email protected] Don't PM or reply here becuase I may not get it soon, email is best. These cams can be...
  6. D'Agostino Racing
    We are having a GP on the Comp Cams Line. This is your chance to get some serious ONE TIME DEALS. We need 5-6 people on board to offer these prices. We already have a couple people in, so it wont take too many more to meet the special pricing. Please contact us for more information and...
  7. 2005 - 2010 Mustang GT
    I am having issues w/ the comp cams stage 2 XFI-SPR cams with cam phaser limiters. Timing for them isn't getting set right this is the second shop I have taken the car too and they are having issues as well. The shop knows there stuff they have 3 stangs running over 1k hp each so im sure they...
  8. Turbo Modular
    Ok guys, long story short a shop near by blew my stock block so I opted for the following. -Alluminator Short-block from FRPP -Turbonetics Turbo kit -FRPP intake -BBK Throttle body twin 62mm -Comp Cams XFI-SPR stage 2, steel springs, steel retainers and cam phasers -FRPP shorty headers -Spec...
  9. 2005 - 2010 Mustang GT
    Set of used Stage 2 ported cylinder heads that come fully assembled with a set of Comp Cams "Thumper" camshafts (part# 127020). These only have 1600 miles on them. Off the car and ready for shipment. Feel free to PM or call me with any questions @ 405 207 7737 $2,000 Thank you, Graycen
  10. 2003 - 2004 SVT Mustang Cobra
    hey guys had some custom 18cc pistons made and they only had the option for 2v valve reliefs and im going to run the comp xer 274 cams they are .475 lift so i need to know if i need valve reliefs for these cams or do i have them shelve the pistons and pay another 135 to make new ones with 4v...
  11. Engine Parts
    I'm selling a set of Comp Cams 3v Stage 2 blower cams. Was told they have less than 3000 miles on them. They look good, but I still sent them to machine shop to polish the journals so they are like new again. Asking $500. Cams are $700 new. May also trade for good forged crank for factory...
  12. Modular V8 and V10 Conversions and Swaps
    I have a couple of questions about the Comp Cams F.A.S.T. XFI System and the DBW on the 3V FRPP crate engine. Is the FAST system compatible with DBW? It doesn't make it clear one way or the other in the Comp Cams Master Reference Guide. If not, my old school rodding techniques tell me I should...
Top