Mustang and Ford Performance Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 11 Results
  1. Snow Performance
    In the next two weeks Snow Performance Water-Methanol Injection systems will be available with braided stainless line. This braided synthetic methanol-proof EPDM hose withstands up to 1250 psi. The hoses are pre-cut for each application and will screw directly into the pump, reservoir...
  2. E85, Ethanol, Methanol and other Alcohol...
    I have a BPU+ Terminator (Intake, Boost (2.76 @ 15psi), Exhaust- see below for specifics). I put down 483 hp / 501 tq. I would really like to find 17 more ponies to break the 500 hp mark without doing another major mod like ported blower or LTs (assuming its possible or there is something out...
  3. 1996 - 2004 Mustang GT
    Well i have asked a million questions and the only responces i ever get are (well maybe kinda's and im not really sures). I want some good answers. The wiring udrade the power goals are 350-380 n/a through 4r70w on e85. Im running a 400 walbro e85 pump(only one pump). Do i need the wiring...
  4. 1996 - 2004 Mustang GT
    Ive been looking everywhere and cant fint any info on how much can a stock 2v piston be safely notched? If anyone has an answer it would be greatly appreciated. Im hopeing to go with a MHS stage 4 n/a cam and I want enought clearance so even if i float the valves they wont touch. Any one have a...
  5. 1996 - 2004 Mustang GT
    I plan on switching my car over to e85. I will be running stage 3 tea ported heads,flattop pistons, 400 lph walbro e85 version (yes it does exist) edelbrock intake, 6061 plenum, lightning mass air, and 42lb injectors. I want everyones help!!! what do you all recammend for a cam do i want a...
  6. 1996 - 2004 Mustang GT
    There has been a lot of questions on fuel pumps for returnless. I have called walbro and they said the 400lph e85 pump is made for a returnless fuel system now. So now we can make about 600 rwhp with a BAP without going to returnless.
  7. 1996 - 2004 Mustang GT
    Im planning on running a built 2v on a stock bottom end. I wanna run e85 but my pump went out. I wanna stay returnless and go with a walbro 450. Anyone have a story to tell about these pumps. also i have to buy a fuel pressure regulator since i have edelbrock rails.Anyone have any for sale or a...
  8. 2003 - 2004 SVT Mustang Cobra
    So iv searched all over this site and can't find an answer. I'm wanting to go E85 and maybe a 50-100 shot down the road. I have everything to install my GT pumps and and dual FPDMs will probably use stock fuel hat and do the fuel line and wire upgrade. I'm not sure if the gt pumps will be...
  9. E85, Ethanol, Methanol and other Alcohol...
    Ok on 93 octane I am ~18.5psi and either 16 or 17 degrees timing if I remember correctly. Switching to E85 will I be better adding timing, adding boost or a mix of the two? What would be the optimum combo on E85 and a 2.8LH Kenne Bell?
  10. E85, Ethanol, Methanol and other Alcohol...
    Fore Precision Works offers E 85 coating, available to all Fore Fuel System Components! Feel free to contact FPW, or your favorite dealer today for more information! :tip:
1-10 of 11 Results
Top