Mustang and Ford Performance Forums banner
eaton
1-20 of 20 Results
  1. 2003 - 2004 SVT Mustang Cobra
    I'm asking for dimensions from 6 rib belt to 8 rib. I'm modeling one piece pulley to be bolted on stock damper, and I need measures how long it must be. I know there is ready versions, but my belt drive will be custom, and I have suitable piece of aluminium for this. I'm still missing few...
  2. Drivetrain Parts
    Brand new, in the box Eaton Limited Slip Differential for 31 spline Ford 8.8 (part number 19588-1). Decided to thin out my car projects and do some home remodeling so I am unfortunately letting this fine piece go. If purchased from a vendor they run $489. I am pricing this to sell quickly so...
  3. 2003-2004 SVT Cobra "Terminator" Classifieds
    I purchased this blower from another member here but decided to go a different route so I'm relisting it. This is a Posi "street" port which is different from his regular race ports. It has his usual inlet port work but no outlet work, this equates to roughly a 2-5whp difference based on what...
  4. Power Adders
    hey guys bought this unit from a guy that had his upgraded to a tvs when it was new i have the blower and inlet with factory pulley still on it. its a very nice unit i would like to get 475 shipped for it!! if interested pm me thx!!
  5. Engine Parts
    Up for sale is a 2003 Ford Mustang Cobra 4.6 DOHC engine. Also included is the T-56 six speed transmission. Engine and transmission were purchased for a 68' fastback project that was never meant to be. As such, I am selling the entire package at a very, very reasonable price (and losing quite a...
  6. Engine Parts
    I have nearly everything needed to complete a 03 Cobra swap. Ported lower intake (it has a broken and rewelded mounting boss. I used it for a year on my race car with no problems) Stock intercooler Stock balancer Pulley bridge Low mileage alternator (less than 200 miles) Front cover Drive...
  7. Engine Parts
    I have some 2003/04 Cobra parts I am looking to sell. I ended up buying a complete engine so I no longer need these. I have listed them below with prices, all prices below are plus PP fees and shipping if not specified. All prices are OBO and I can send pics to your e-mail upon...
  8. Power Adders
    Im selling a 2003-2004 stock eaton with a 2.76 pulley and an anodized black Billetflow 100mm snub idler set up. the eaton has brand new oil in it and about 30,000miles. it is in great condition, and still has a good deal of coating on the rotors. looking for 400 obo shipped for the blower and...
  9. 1996 - 2004 Mustang GT
    Alright the stock rear axle in my 99 GT is starting to make noise and it's just over 100k miles. I installed 3.73 gears about 20k miles ago but I've got a grinding noise from the right rear which seems to be the axle. I've got some cash but I want to make sure it's built right. I'm expecting...
  10. Power Adders
    Eaton blower with new 2.76 pulley blower had around 24k- 28k miles. PM me if you are interested i have video's of it in perfect working order. Blower pulley is not damaged and has no dents at all. Blower oil was changed around 20k miles. Plenty of teflon still on the rotors. Buyer pays for...
  11. Power Adders
    2003-2004 Cobra Plenum, great for eaton swaps on a mach 1! The plenum has been lightly ported some. Came off of my friend's Mach 1 w/ Eaton setup. Only removed because he went to a single blade throttle body. $45 SHIPPED!
  12. Engine Parts
    2003-2004 Cobra Plenum, great for eaton swaps on a mach 1! The plenum has been lightly ported some. Came off of my friend's Mach 1 w/ Eaton setup. Only removed because he went to a single blade throttle body. $45 SHIPPED!
  13. Engine Parts
    Timing cover off of 03 Cobra, has around 30k miles on it. This is needed when doing an Eaton swap on a Mach 1 or 99-01 Cobra. These are upwards of $300 new, sell for $150 SHIPPED!
  14. Engine Parts
    03-04 Cobra Plenum & Throttle Body, great for eaton swaps on a mach 1! Great spares to port for a Cobra! The plenum has been lightly ported some. Came off of my friend's Mach 1 w/ Eaton setup. Only removed because he went to a single blade throttle body. $100 SHIPPED!
  15. Power Adders
    Stock Heat Exchanger off of an 03 Cobra with low miles. Has minor wear here and there like they all do. Great spare, or for custom application, or for eaton swap on Mach 1 or 99-01 Cobra. $35 SHIPPED
  16. Engine Parts
    Hello there. I am selling a Terminator Blower with 5k miles on it along with a bunch of the supporting parts for the blower system. All parts were taken off the car when a KB was put on. NO lowballers. Shipping will be Via UPS and will ship immediately after payment. Paypal only please. PM ME...
  17. 1999 - 2004 SVT Lightning and 2001 - 2003...
    Hey guys well i am making an attemp at getting a prototype set of rotors made for the current eaton m112 that we are all using on our cobras and lightnings. My idea is that these will be 3 or 4 lobe rotors with between 120 and 160 degree of twist. Since no one else has been willing to further...
  18. 2003 - 2004 SVT Mustang Cobra
    Hey guys well i am making an attemp at getting a prototype set of rotors made for the current eaton m112 that we are all using on our cobras and lightnings. My idea is that these will be 3 or 4 lobe rotors with between 120 and 160 degree of twist. Since no one else has been willing to further...
  19. Power Adders
    Still on the car, debating on selling, if I can get the right money for it, I will go ahead and pull it and sell it. Will also consider trading for SVO intake setup & cash. SVO/Roush Eaton M112 Supercharger Kit, has stock 6LB 3.5 Pulley on it, and has NEVER had a more aggressive pulley on it...
  20. 2003 - 2004 SVT Mustang Cobra
    Does anyone have a painted Eaton blower? I want something unique. If I were to have it painted a custom color, what type of paint or color does it have to be? Something heat resistant obviously. I was just wondering if anyone has and if so do you have pics? . I searched the forums but didn't...
1-20 of 20 Results
Top