Mustang and Ford Performance Forums banner
engine
1-20 of 22 Results
  1. The Bar
    I wanted to do some home decoration with engine parts since many year. I was finally able to do just that this summer. Tought I would share with you. First project, very simple and quick to do My old flywheel from the time I had a manual transmission in the car, a GT crank, and my crank...
  2. Engine Parts
    $500 for cams $700 for intake text or call 914 804 7375
  3. Engine Parts
    Brand new just received decided to go different route. Paid $900 looking for $850 shipped? call or text me 914-804-7375
  4. 2003-2004 SVT Cobra "Terminator" Classifieds
    -- New Aluminator bare block which is no longer produced, the block was purchased as a spare and was stored in my house. I am asking $1200 and prefer local pick up near Cleveland OH. I will ship at buyers expense, crate will be built and weighs around 150lbs. FORD RACING 4.6L ALUMINATOR BLOCK...
  5. 1996 - 1998 SVT Mustang Cobra
    I have a mostly stock 1996 Cobra, with a '98 Cobra motor swapped into it. Motor has around 110k on it, and was rebuilt from a spun bearing around 30k ago. I don't drive the car daily, and have noticed that after it sits for around 4-5 days, on startup shes lets out a blue cloud. I've done a...
  6. Electronics
    I need an engine harness from a 07-09 gt. It has to be from a manual car. Thanks
  7. Engine Parts
    20,000 mile part out. Engine ran perfectly before tear down. New MMR race engine taking its place and I need to recover some of the $$$$ damage. All offers considered Working IMRC's with control box - make offer stock maf $50 short short block $800 stock h pipe $100 stock mufflers $75 stock...
  8. Engine Parts
    No longer have time and could use the cash. I bought this engine from Steve aka Birdman on here. Has 42k miles, all original clean engine teksid engine. Will need cam and crank sensors and coil packs, other than that it is complete. Have a brand new never used Ford engine harness. PCM that has...
  9. Engine Parts
    Modular Power House 8.5:1 Compression 302 Stroker (stroked 4.6). Romeo Block .020 Over Ross Pistons Eagle H Beam Rods w/ ARP Cap Screws Forged Crankshaft ARP Main Studs MMR Oil Pump Motor was built in 05, only has around 14k miles on it or so. It was broken in n/a for about 2k miles before the...
  10. Vendor Deals
    Only Coast High Performance can continue to bring you these awesome specials. With Thousands of Engine Kit Combination's to choose from, we're sure to have exactly what your looking for! Shipping on any engine kit is just $39.99 and all shipping price across the board have been lowered...
  11. Engine Parts
    Modular Power House 8.5:1 Compression 302 Stroker (stroked 4.6). Romeo Block .020 Over Ross Pistons Eagle H Beam Rods w/ ARP Cap Screws Forged Crankshaft ARP Main Studs MMR Oil Pump Canton Oil Pan Also has a water pump on it still, newer timing set to go with it, that was used on it before...
  12. 1987 -1993 Mustang
    Our balancing video seems to be a bit of a success and I wanted to offer everyone more on the subject of balancing. If you haven't seen the video click below to see how the balancing process is achieved. Balancing Video | Click Here To offer more info on the subject, we've put a page...
  13. Engine Parts
    Meziere Electric Water Pump w/ Idler for Modular Ford, and wiring installation harness. Great for a supercharged car, if you toss a belt, keep driving until the battery dies, without fear of overheating! Pick up some power too! Used. $300 SHIPPED! Engine Harness from 00 GT five speed, this is...
  14. Vendor Deals
    Precision Turbo continues to expand and we are seeking an entry level Sales/Technical Representative to be directly involved in that growth. The ideal candidate will train to spec out turbocharger, intercooler, fuel system, and engine management applications. He/she will also answer questions...
  15. Midwest
    Precision Turbo continues to expand and we are seeking an entry level Sales/Technical Representative to be directly involved in that growth. The ideal candidate will train to spec out turbocharger, intercooler, fuel system, and engine management applications. He/she will also answer questions...
  16. Engine Parts
    '03 4.6L Cobra motor w/forged refreshed internals, stage 2 comp cams, spring, built oil pump and valve covers. Before i built the engine, it had 26k on it. I put about 500 miles on it. Very well maintained, always had royal purple race oil, never abused. $5000 I'm upgrading to a bigger engine...
  17. Engine Parts
    '03 4.6L Cobra motor w/forged refreshed internals, stage 2 comp cams, spring, built oil pump and valve covers. Before i built the engine, it had 26k on it. I put about 500 miles on it. Very well maintained, always had royal purple race oil, never abused. $6500 I'm upgrading to a bigger engine...
  18. Modular V8 and V10 Conversions and Swaps
    OK, WOOOSAAAAA...... I have an 01 Roush stage 2 that i converted over to an 03 cobra engine drivetrain (please dont ask why im still kicking myself cuz i could have just bought an 04 mystic and been happy with the roush in storage) ANYWAY i have swapped all harnesses and computer except for the...
  19. Engine Parts
    The engine has 66,700 miles and comes with wiring harness, computer, a set of BBK long tube headers, whatever else not used in the install electrical or cooling system wise, and a brand new CRX intercooler setup which you will have to just reclock the blower and buy a smaller supercharger pulley...
  20. Engine Parts
    have a 20K mile 04 Mach 1 Engine, Trans, harness, and cpu that I would sell for $3K. Great for a mod swap or upgrade your gt to 4v. I also have driveshaft with yoke on it to include in the deal. Still on stock k-member out of car, email or pm me for pics. Email is [email protected] Tks, Lee
1-20 of 22 Results
Top