Search Results for ‘heads’

Already bought some and i dont know how to delete this

Ill be running edelbrock intake 6061 elbow stage 3 heads aftermarket cam(Hitech stage 2 na cam or bullet raceing custom cam). Will 42lb injectors be to big. What size does everyone recommend. Also plan on running lightning mass air what is all needed. My intake is 3in and lightning mass air is...

I have a lower supercharger manifold off a 03 04 cobra thats in perfect conition-$400. 2 sets of 4v B heads bare or with cams so i will seperate if desired $225 set of bare heads, and $100 for cams. Together $300 for heads and cam together. Thank you.

Ok found a set of 4V heads with a whipple blower I'm just wondering what all I'm going to need to successfully complete this swap I already realize I'm gonna need the basics like upgraded fuel system, belts and pulleys but as far as electrical wiring harnesses I have no clue so any help will be...

Anybody know someone who would be willing to make (and/or who makes) a set of custom full length long tube headers for a set of FGT heads that will be going into a '03 Mustang GT? I was told that the bolt pattern between the FGT heads and Cobra R heads are different and thus 03/04 Cobra headers...

Hello All, I'm at a crossroads with what I want to do for my Spring build. I'm kind of torn between going with a big blower or getting a small blower and putting money in cams/heads. I know doing the cams/heads would be a little more money and would probably end up with very similar...

Listed below is a project I decided to liquidate. I provided a brief description, PN and price of each item, as well as, pictures. All of the items listed are top quality and many are still in the box. I priced everything to sell quickly so get your reasonable offer in before someone else snags...

I keep hearing oh its not as good as it sounds oh its under rated my ls1 will take it. The mustang will never be on top. Well i have been looking at forms and driving cars and racing for a while and im not biassed, not at all. I have had a ls1 before and its a great motor! But i dont see any...

I have a 96 Cobra I just bought and the bottom end is still together but the heads are off the motor. Car was getting hot I was told. I am not sure if they burped the motor when they refilled the radiator as the person who owned the car does not know much at all about motors. I am going to have...

Set of used Stage 2 ported cylinder heads that come fully assembled with a set of Comp Cams "Thumper" camshafts (part# 127020). These only have 1600 miles on them. Off the car and ready for shipment. Feel free to PM or call me with any questions @ 405 207 7737 $2,000 Thank you, Graycen

Set of used Stage 2 ported cylinder heads that come fully assembled with a set of Comp Cams "Thumper" camshafts (part# 127020). These only have 1600 miles on them. Off the car and ready for shipment. Feel free to PM or call me with any questions @ 405 207 7737 $2,000 Thank you, Graycen

Modular Power House 8.5:1 Compression 302 Stroker (stroked 4.6). Romeo Block .020 Over Ross Pistons Eagle H Beam Rods w/ ARP Cap Screws Forged Crankshaft ARP Main Studs MMR Oil Pump Canton Oil Pan $2500 with the pan, $2400 without (the longblock alone with the heads and cams listed below was...

For Sale: 1999 Mustang GT PI (performance improvement) Heads 150,000 Miles on heads Ran great when pulled off the engine Selling as complete head assembly with cams, valves, springs, valve covers, etc.... $250 Takes them Contact me on here or email at [email protected] THANKS!!!!

Just Bought some ported heads and when i got them them They gave me a bag of ferrera intake valve non opened and manley exhaust valve non opened to put on later. Is this a good thing or bad? Arent you supposed to cut the valve to the valve seat of the head?? head has a multi angle valve job...

I have a set of 2001 Lincoln Navigator heads, cams, front cover and valve covers for a 4 valve 5.4 engine. Also have a set of 2004 Cobra cams. The heads have gotten valve job from engine builder Mike Hally at Hi Flow Heads in Chicago, Ill. The heads have not even been placed on a block since...

Posting this as a feeler. I have a set of Lincoln Navigator heads, cams and front cover for a 4 valve 5.4 engine. The heads have gotten valve job from engine builder Mike Hally at Hi Flow Heads in Chicago, Ill. The heads have not even been placed on a block since work was done. Not sure what its...

First of all, big thanks to XXX Motorsports (850-457-DYNO) for getting me in today to attempt to break their dyno with the massive powaaaa! 98 GT, 5 Speed, 3.55 Gear, Nitto 245 Drag Radial, 93 Octane, 90.67 Degrees Roush/SVO Eaton Supercharger @ 4-5 PSI SVO Heads PI Cams FMS Shorty Headers...

I just read about 40 pages from 2006-2007 and never really found any solid info (dyno sheets). On an average street cobra with a stage 5+ ported eaton, how much power and torque would you pick up with a mild street cam and stage 3 ported heads? When I say stage 3, I am meaning stiege's stage 3...

i have a 04 gt with pretty much stock. 78 mm throttle body with cai and exhaust. which cams and heads do you think would be my best bet? thanks

Less than 1000 miles of use. At least one of the heads needs to be line bored along the cam journals with the proper sized bearings installed, but I would go ahead and have them both done. Any decent modular builder can do this for you. Heads are complete. One head has cam installed, other cam...