Mustang and Ford Performance Forums banner

kenne bell

  1. Fuel System Components
    Mammoth 79mm x168mm 2150-2350 cfm ... fits: Shelby gt500 mustang,03-04 cobra, hemi, 2011 and up 5.0 mustang. Is Mono blade. Used with kenne bell Mammoth kits. Brand new never used $500 shipped BTW..im not a scammer either we will do whatever so u feel comfortable about the sale I know how...
  2. 2003-2004 SVT Cobra "Terminator" Classifieds
    This is the unicorn piece that rarely comes up for sale. The Thump version has been designed after this bad boy. $350 for the tensioner or $450 with pre-notched oem pulley bridge. You can sell your oem parts and recoup some of the investment (I sold my tensioner for $75 and $150 from my...
  3. Power Adders
    Has about 10k miles on it. Includes Blower, lower intake, plastic IMRC deletes. Balancer, and 2 pulleys. Fits 96-98 cobras or other B heads. 3000$ for everything. Will post more pics later.
  4. 2003 - 2004 SVT Mustang Cobra
    I'm currently finishing up the installation of the 2.8 kb lc mammoth and going step by step with the instructions provided by kb. My question is kb recommends that the externally mounted boost bypass diaphragm is supposed to have a vacuum source. I've been told that it should be the opposite...
  5. 2007+ Shelby GT500 Classifieds
    I have a JLT V2 Carbon intake for the GT500 for sale. It is in great shape but could use the filter cleaned. The carbon tube look awesome under the hood of these cars. I'm asking 250.00 plus shipping and paypal fees or best offer. If you need any more pics or have any question please ask.
  6. Tuning and Diagnostics
    I've been fighting this nasty little problem for a while and need some help. My car is an 06 Mustang GT with a forged/stroked 3V and a KB 2.6, Comp Cams Stage II Blower cams, 80 lb injectors, return fuel system running E85. Problem I'm having is under load doing WOT pulls while tuning my MAF...
  7. Vehicles
    Up for sale is my 2003 Cobra. This car is immaculate top/bottom/inside/out. It only has 12,xxx miles on it and has a fully built VT stroker motor which now makes it a 5.0L. It has stage 3 crower cams, cp pistons, carillo rods and a 4340 billet forged crank. 26 spline input shaft, spec 3 twin...
  8. Vehicles
    2003 Mustang Cobra (More Pics Coming) Located Pittsburgh, PA DSG Metallic 37,707 miles 601whp/540ftlb 93 Octane Tune 3" Pulley (17psi) 641whp/586ftlb 100 Ocatane Tune 2.75" Pulley (19psi) Love this car but I just ordered a 2013 Mustang GT and I do not need two Mustangs. It is a beast. One...
  9. Power Adders
    Well its that time again,winter build. I'm going TT and will be selling everything that has to do with my S/C. The set up i have is the best you can possibly get for your cobra if you like your blowers. If your looking to go all out and make 700-800 whp with no heat problems, this is the set up...
  10. Engine Parts
    hey guys im brand new here, not sure exactly how this site works yet. ive got a 2001 Bullitt with 35k miles. all parts im going to list have 35k miles or less. complete intake upper/lower with twin 57mm throttle body (35k miles) Vortech V3-SI (not even 10 miles) blew my motor, 10PSI on stock...
  11. 2005 - 2010 Mustang GT
    I hope this isn't a re-post. I did a search first. I have an 08 Bullitt with a 2.6 Kenne Bell 11psi. The intercooler keeps getting air bound and I end up having to fiddle with the hoses to get it running over and over again. I have all the hoses routed so that the pump should not be able to get...
  12. Power Adders
    4 ¼" KB pulley $75 shipped. LT
  13. Power Adders
    For sale is my Kenne Bell 2.4 supercharger with polished finished and the Accufab throttle body. The supercharger is in good condition and was working perfectly when removed. I will also include in the sale two pulleys; 3" and 3.75", a parital bottle of KB supercharger oil, and the pulley...
  14. Vehicles
    Will take cash offer of $20,000 if the deal can be completed by the end of november (COMPLETE not offered...lol). I am currently located in Ohio but will be moving back to SC in two weeks which means I will have to $hip the car. So be quick and get a BADASS DEAL! I bought this car from a...
  15. 2011 - 2014 Mustang GT and Boss 302
    **EXCLUSIVE** Evolution Performance Edition Kenne Bell 2011 Mustang GT 5.0L 4V Twin Screw Supercharger Kits In-Stock! FREE SHIPPING! This kit includes the Kenne Bell 2.8H Twin Screw Supercharger, Complete Air-To-Liquid Intercooler System, Intake Manifold, Mammoth Inlet Manifold, 114mm...
  16. Vehicles
    This is just currently a feeler ad. Im currently deployed and the pictures that i have are from before i left, the car is currently being repainted, (only because i bought a new hood and DSG is hard to match so the whole car was scuffed up to be painted and re-cleared) From the previous owner i...
  17. E85, Ethanol, Methanol and other Alcohol...
    Ok on 93 octane I am ~18.5psi and either 16 or 17 degrees timing if I remember correctly. Switching to E85 will I be better adding timing, adding boost or a mix of the two? What would be the optimum combo on E85 and a 2.8LH Kenne Bell?
  18. Fuel System Components
    Bought this for my Whipple build and ended up with two of them. It's still brand spankin new, haven't even taken it out of the bag it arrived in. Selling for $225 shipped to your door. That's a $40 hit to me for the price of the unit and the shipping and a great deal for you.
  19. Power Adders
    A friend is selling the Kenne Bell 2.8H Mammoth kit that we pulled off of his 03 Cobra so he could go with a twin turbo set up. He bought the blower new directly from Kenne Bell in December of last year, I think. He put 800-1000 miles the car since then. On about 25psi, the car made right...
  20. 2007 - 2014 Shelby GT500 Mustang
    For those of you that have run your car at the track, what kinda ETs did you run? I finally have my car where I want it, and will be hitting the track up in the next few weeks. I am running 275/45/18 M&H Drag Radials on the factory GT500 wheels. These tires are slightly taller, but a bit...
Top