Mustang and Ford Performance Forums banner
suspension
1-20 of 25 Results
  1. CJ Pony Parts
    Air Lift Performance 95723 Mustang Digital Air Kit 2005-2014 Today we have Jeremy from Air Lift Performance to help us install their complete digital air suspension kit on a 2013 GT500. This kit will fit all 05-14 Mustangs. Air Lift's kit allows you to drop the ride height over 4 inches from...
  2. CJ Pony Parts
    Mustang Rear Control Arm Kit Tubular Stainless Steel 1979-1998 | CJ Pony Parts This Stainless Steel Tubular Rear Control Arm Kit is for all 1979-1998 Mustangs and will replace the factory stamped steel arms, which tend to flex and deflect during spirited driving. This kit includes polyurethane...
  3. CJ Pony Parts
    Mustang BMR Rear Lower Control Arm Non-Adjustable With Poly Bushings Pair 2005-2014 | CJ Pony Parts This pair of BMR Rear Non-Adjustable Lower Control Arms with Polyurethane Bushings fit all 2005-2014 Mustangs. They replace your stock control arms, which are marginal, at best. All of BMR's...
  4. CJ Pony Parts
    Lowering a Mustang and upgrading the suspension to handle performance driving are two of the most common desires of Mustang owners looking at new suspension components. Well, CJ Pony Parts has both in one package. Check out the Mustang suspension kits and components from Ridetech, which features...
  5. 1996-2004 Mustang Classifieds
    I have for sale A front set of Red Saleen Racecraft Preformance Lowering Springs. They will fit any mustang 94 up! They give and a much firmer feel in the corners and lower ride heights. 1/2 of a coil has been cut off on each lowered about another 1/2''. Springs are located at AED in Cameron...
  6. Suspension Parts
    Title says it all. Recently just went back to regular rear springs. Had these on the car for maybe 200 miles if that. Swapped to MM shocks to match my front. Shock has some wear on the top part of sleeve but that's a non-issue due to these still having a 2 finger space between the wheel at...
  7. 2003 - 2004 Mach 1 Mustang
    Here is a list of all the suspension upgrades that I'll be adding to my Mach 1: Tokico D-Spec Adjustable Shocks and Struts Maximum Motorsports Front Coil-Over Kit w/ Springs (I'm contacting MM for spring rate) H&R Sport Springs (rear pair only) Maximum Motorsports Full Length Subrame Connectors...
  8. 2003 - 2004 Mach 1 Mustang
    I'm nearing the end of purchasing all of my suspension, chassis, and drivetrain upgrades and I wanted to see what others thought of my set-up before I got it all installed. Here is a parts list of all my upgrades: Moser 31 spline forged axles Ford Racing 31 spline limited slip differential...
  9. 2003 - 2004 Mach 1 Mustang
    I'm almost done purchasing all of my suspension/chassis/drivetrain parts and I had a question in regards to subframe connectors. I have steeda UCA's and LCA's and I also purchased Wild Rides Race Cars Combo Battle Boxes (both upper and lower torque box re-inforcement included in kit) and I was...
  10. 2011 - 2014 Mustang GT and Boss 302
    Quick inquiry regarding our 2011 GT. There’s quite a lot of noise coming from the front end (seems to be a suspension problem) when driving over bumps or dips. It is most apparent when the car goes over a speed bump. I am horrible at describing sounds with words, but it sounds like a deep...
  11. 1987 -1993 Mustang
    Ive replaced every suspension component on my 1986 5.0 GT except for the Springs. I have'nt really upgraded the components, just replaced with the OEM stuff. Anyways, I'm taking the Stock Springs off my 1996 Cobra, and was wondering if it was a good idea/ worth it to swap them into my Fox. Would...
  12. 1996 - 1998 SVT Mustang Cobra
    I'm getting ready to do some work on my 1996 Cobra, and need some help selecting a good lowering kit. I've already bought Steeda's X2 balljoints and bumpsteer kit, as my car need balljoints. I have'nt been able to decide which lowering springs would be best, and want a really agressive ride...
  13. 2003 - 2004 SVT Mustang Cobra
    I wanted to post this in the 03/04 cobra section because i assume your front suspension setup is similar to the 99 cobra's. I plan on doing a 99 cobra front suspension. I am looking to daily drive this twin turbo 57mm cobra daily. I wanted to know do you think that the K-member from UPR is...
  14. Big Body Modulars
    So, do town car, crown vic and marauders have the same general suspension? I ask because i have a 2005 town car that im looking at lowering and making a bit more nimble. Im sure someone on here is an expert. Help me oh gods of the big bodies! I'm also going to Procharge it.....but that's for...
  15. 2011 - 2014 Mustang GT and Boss 302
    Blow-By Racing's NEW GO GREEN! Suspension products. Available Now!!! www.BlowByRacing.com S197 LCA Relocation Brackets. These are a true bolt in design. S197 Double Adjustable Upper Control Arm w/ Poly Bushings 2005-2012 Mustang Strut Tower Brace. Clears BOSS 302 Intake Manifold S197...
  16. 2007 - 2014 Shelby GT500 Mustang
    Hey guys, Anyone know if there is a company that builds a remote enabled suspension setup for Mustangs? I want the ability to change the suspension characteristics of my ride from with in the cockpit. Hit a switch and I'm pulling 1g on the skid pad hit another switch and I'm drinking coffee...
  17. Suspension, Handling and Tires Tech
    I have a 03 GT, with tubular front suspension with coilovers, UPR rear suspension with coilovers and strange shocks. I have full length subframe connectors and a 6 point roll bar. This car has been a project and has just recently received rear suspension and tires/wheels. Today I had to...
  18. Vendor Deals
    Rid your Mustang of unwanted body roll. Drastically increase your ability to corner and brake with this full suspension system from Roush. Make a big improvement to the handling of your 2005-2010 Mustang with the ROUSH® Complete Ford Mustang Suspension Kit. This suspension package has been...
  19. Suspension Parts
    I've got the front and rear sway bars off a 97 Cobra I parted out. $40 each or both for $75+ship.
  20. Suspension, Handling and Tires Tech
    I have a full AJE tubular front supsension that i bought for my 00 mustang project but sold it and now in the process of getting a 04 Cobra.. I decided instead of losing my butt by selling it im just going to put it on the cobra. I was going to front coilover setup on the 00 but dont really want...
1-20 of 25 Results
Top