Search Results for ‘trickflow’

Hey guys, just got motor put back in after we had coolant getting into the oil on this fresh build. Got it started and it started right up but was running really ruff. let it idle for about 30 seconds and killed it. Went to start again and it was hard to start but idled. we decided to kill it...

Already bought some and i dont know how to delete this

I have a brand new TFS stage 1 cam for 5.0/5.8. Part # TFS-51202000. It has been installed but never fired so 0 run time. I do not have the box or cam card. Spec are dur @ .050 221/225, 499/510 lift on a 112 lobe sep 2000-5500rpm. You can run this cam on a stock stall converter with 0 issues...

Modular Head Shop Stage 2.5 Blower/Nitrous Cams & New ARP Cam Bolts, they were installed in the 44cc set of heads, but were NEVER RUN. Specs are 231/238 550/540 110/118 114. These are TFS Specific cams from Nick McKinney, but can be used in a PI head as well, with a flycut piston if on stock...

TFS 38cc 2v Heads with 3 miles, and a few hours of idle time. Friend bought brand new set of 44cc heads, ran into some financial issues and lost interest in car, traded heads to another buddy for these 38cc heads (he bought these 38cc heads new, and after getting the car going, decided his...

C&L Plenum off of my friend's Vortech 02 GT, C&L says this fits mid 01-04 but supposedly you can run it on a 96-01 if you swap some vacuum lines around. In good shape. $95 shipped Also have 01-04 Lightning 90mm MAF, supported 431 rwhp without pegging on a Vortech 02 GT, oem maf so you get...