Mustang and Ford Performance Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. 1996 - 2004 Mustang GT
    Looking at building the most powerful 2v possible there’s no budget and I’m thinking twin turbos but I want to keep it a 2v that’s the only thing that must stay is a 2v head on a 4.6 block but I’m not opposed to a stroker or anything like that (it’d be going in a 2002 mustang gt)
  2. Engine Parts
    1999 oil pan with 2 drains for twin turbo setup
  3. Turbo Modular
    Hey guys, I've been rocking a Hellion single turbo kit (Turbonetics 76mm) since 2005 and at the time of the install, I thought that would be PLENTY of power and would never want/need any more….. lol. I got used to the power real quick but instead of upgrading the turbo, I decided that I...
  4. Turbo Modular
    I got a fresh Teksid block 302 stroker from HPP racing for the 5.0 magazine King of the Street competition. So we decided to turn up the boost on pump E85 and 33lbs of boost. This is on stock coils and 160lb Billet Atomizer injectors.
  5. Turbo Modular
    I was able to make over 1,000rwhp on the dyno during the 5.0 Mustang and Super Fords Magazine 1st Annual - Battle at the Beach contest. Steve Turner (Editor of 5.0 magazine) presented me with my award on Saturday. I want to thank all the guys at Fastlane Motorsports for helping me with my...
  6. Turbo Modular
    Oliver Connecting rods offers two wrist pin diameters in their rods. Factory .866" and the SBC .927" pin....When (if ever) would it be necessary to run the larger pin in a 5.4L TT engine? Engine will probably make 1100-1200 RWHP with a 7500 RPM redline. Please post your answers. Keep it...
  7. 2005 - 2010 Mustang GT
    For those of you that don't know, I sold my THP Twin 57mm Kit, That kit got me to run 9.6x@143 very consistent, we ran the kit with a built 281CI stock heads and stock cams, we even think I hold the record of the fastest 3V with stock heads/cams....who knows.... The new set up is as follows...
  8. Pictures and Videos
    We took some cars out to Irwindale last week, we did very well!
  9. 2003 - 2004 SVT Mustang Cobra
    I wanted to post this in the 03/04 cobra section because i assume your front suspension setup is similar to the 99 cobra's. I plan on doing a 99 cobra front suspension. I am looking to daily drive this twin turbo 57mm cobra daily. I wanted to know do you think that the K-member from UPR is...
  10. Power Adders
    Kit was installed but the car was never started with the kit on. compressor side is .70 and turbine side is .68 and the kit does not come with K member. The kit was mounted on my 99 cobra. My 96 cobra has the same kit but with the non ball bearing turbos, it made 1161rwhp through a tko and on...
  11. Vehicles
    Well, the time has come to move on. I never thought this day would come but I have a bad itch for a new project. The 03'-04' Cobras have been my home for the last 7 years but it's time for a change. The car is for sale; just testing the waters to see if someone wants her. I purchased this car...
  12. 1996 - 1998 SVT Mustang Cobra
    hiya, im curious as to get some input on intake runner lengths, i have a 4.6L Stroker with the Stage 3 B heads and twin 74mm turbo's, we are looking at having 1500hp+ changing between 8500-8800rpm, was considering a Hogan's one but at close to $4000 not sure if its an option as its quite alot of...
  13. Power Adders
    Kit has probably 1500 miles on it and several 1/4 mile passes. No pipes are rusted, and the kit is in excellent condition. Kit is on a 99gt with a reichard racing intake with an oval tb but I also have the pipe for a standard gt intake. Kit includes all piping, 57mm turbos, intercooler...
1-13 of 13 Results
Top