Mustang and Ford Performance Forums banner
1 - 4 of 4 Posts

· Registered
552 Posts
Discussion Starter · #1 ·
I have a low mileage blower for sell (LOOK AT ROTORS!)
Good port job, Rotors are in great shape. YOU WILL NEED TO Relocate 2 intercooler bolts. (2 were broken off and i drilled and tapped new holes in the blower). Greased bearings, inlet ported, TB polished, and Outlet/inlet of blower ported.
Comes with 2 bottles of supercharger oil, Inlet, Outlet, TB, Stock upper pulley.

I can get better pictures of the blower finished if needed. Most of these were taken pre-polish.
But it allows you to see what kind of port your looking at.
550 Local pickup or meet within reason/ 600 Paypal. OBO
[email][email protected]
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.