Mustang and Ford Performance Forums banner

WTB: Set of 4v blower cams

2K views 2 replies 3 participants last post by  97novi2k 
#1 ·
I am looking for a set of 4v blower cams or a set of 97 cobra cams. Let me know what you have. Thanks, Jay
 
#2 ·
I have a set of ford racing GT cams for a 4V. These cams with a good tune are suppose to add 100hp to a Cobra motor. These work with factory valve trains, no need for long valves or special springs.

FORD GT SUPERCAR
M-6550-GT
Intake: .450 - 200@.050 (FRPP Advertised - 11.14mm/.456in)
Exhaust: .472 - 209@.050 (FRPP Advertised - 11.36mm/.469in)
Increases lift from the stock 10mm to 11.14mm intake and 11.36mm exhaust
 
#3 ·
Actually these won't give you very much of a gain over the stock cams. They might give you 10-15 rwhp with a tune. Second you need to run high lift springs with these cams to be safe. These cams have a good powerband range and can make power father in the rpm range than stock cams

You will NOT see a 100hp increase with just these cams and a tune
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top