Mustang and Ford Performance Forums banner

MPH 302 Stroker Shortblock NW Fl area!!!

2K views 1 reply 1 participant last post by  Speeds8erM-1 
#1 ·
Modular Power House 8.5:1 Compression 302 Stroker (stroked 4.6).

Romeo Block .020 Over
Ross Pistons
Eagle H Beam Rods w/ ARP Cap Screws
Forged Crankshaft
ARP Main Studs
MMR Oil Pump
Canton Oil Pan

Also has a water pump on it still, newer timing set to go with it, that was used on it before.

$2500 with the pan, $2400 without (the longblock alone with the heads and cams listed below was $9000 :eek: ) or $175 for the pan by itself ($270 new!!!!!!)

Motor was built in 05, only has around 14k miles on it or so. It was broken in n/a for about 2k miles before the blower went on. Does not use oil (has used less than 1/4 of a quart in 2500 miles), doesnt knock, tick, or smoke. Was built by Proline Race Engines for MPH, the same people that build motors for Underground Racing's TT Gallardos/Vipers/Ford GT's, etc that make 1200-1700+ hp, as well as Tim Lynch's outlaw car. Made 305 RWHP n/a, even with the low compression, and blower cams!

Heads are sold

Pics are from when the motor was new


http://img.photobucket.com/albums/v684/slackerm1/00%20GT/20551220010_large.jpg[/img

Recent shortblock pics
[img]http://img.photobucket.com/albums/v684/slackerm1/Stuff%20For%20Sale/Shortblock1.jpg






 
See less See more
10
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top