99 GT w/ 5.4/80mm Turbo/AC/4R70W 800 HP

+ Reply to Thread
Results 1 to 9 of 9
  1. #1
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default 99 GT w/ 5.4/80mm Turbo/AC/4R70W 800 HP

    I posted this not long ago, but figured it needed a new thread, since it has some new power numbers.

    A friend of mine is toying around with the idea of selling his built 99 GT. Car is silver with dark grey cloth interior. Car has all working factory options, and at times is used as a daily driver with no problems, idles and drives pretty much like a stocker until the loud pedal goes down.

    The run down on it is

    Motor:

    5.4 Swap w/ Manley Pistons, Manley H Beam Rods, Forged Navigator Crankshaft, Cobra Oil Pump, ARP Main, Head and Oil Pan Studs, ARP Side Cap Studs, 9.2:1 Compression

    Navigator 4v Heads Ported by Modular Head Shop w/ Comp .500 Lift Springs @ 130 LBS of Seat Pressure, and 98 Cobra Cams

    MMR Sheet Metal Upper Box Intake w/ Navigator Lower

    75mm Throttle Body

    Meziere Electric Water Pump


    Turbo System:

    Custom built turbo kit using a

    Borg Warner SX80 Turbo with a 1.07 A/R & T6 Dual Scroll Flange, & Custom Race Impeller

    Treadstone 4.5x33x17 Intercooler (low IAT's with this!)

    Procharger Race BOV

    Turbonetics 45mm Race Gate

    Oil Relocation Kit

    HPX Slot Style Maf & Diablo MAFIA

    3.5" Cold Side Piping

    Now has 2.5" Exhaust ran all the way to a set of tips (no mufflers)

    Kit clears ac, power steering, automatic transmission, everything.


    Drivetrain:

    Lentech Strip Terminator 4R70W Transmission w/ Manual Valve Body & Lentech 2400ish Stall Converter, Autometer Transmission Temp Gauge

    B&M Transmission Cooler & Stainless Lines

    B&M Hammer Shifter

    Moser 28 Spline Axles

    3.27 Gears

    FMS Aluminum Driveshaft

    AJE Tubular K Member w/ Urethane Mounts (and an extra set of solid mounts)

    BBK Subframe Connectors

    17x9 & 17x10.5 Deep Dish Bullitts (clear is peeling on rears)

    315 Mickey Thompson Drag Radials (just added in the last month)


    Fuel System:

    Complete Return Style Conversion utilizing the following

    Aeromotive Eliminator Pump (rated to 1400 HP)

    12AN Stainless Feed Line to Pump

    10AN Stainless Line to Y Block at the Rails

    Aeromotive Billet Fuel Rails

    Aeromotive Race Fuel Pressure Regulator

    Ford Racing 80LB Injectors

    15 Gallon Fuel Cell in Trunk (uses stock fuel level gauge & low warning light)

    Car also has stock tank still in it, if you want to convert back to that

    Misc:

    Kaenen 4.5" Cobra R Hood (need to clear 5.4 motor)

    Stock Spoiler Moved Back 2"

    Battery Relocated to Trunk

    Two Pusher Fans & 1 Puller Fan (needed to clear turbo & maintain ac condenser)

    SCT Xcal2 Programmer

    Tuned by XXX Motorsports:

    649 rwhp through the unlocked converter, SAE on a Dynojet on STRAIGHT PUMP GAS, NO METHANOL, on only 15 degrees of timing, on 19 psi (previously made 647 rwhp on 18 psi before adding the MT Drag Radials, and exhaust).

    804 RWHP & 725 RWTQ on race gas at 26 psi as of the other day, through the exhaust.

    This transmission shows alot less on the dyno than a stick would, the 03 Cobra that it was previously in showed 100-120 RWHP LESS than what it did with the T56, so you can imagine how much power this car is really making at the flywheel.



    Car has full interior, ice cold ac, working heat, power windows, power locks, power steering, cruise control, power driver seat, power mirrors, keyless, Mach 460 Stereo. Paint is good for the most part, has some small scratches on a fender, and the interior is in good shape.

    Has approx 84k miles on body. Motor & turbo kit only have a couple thousand miles on them, motor has excellent compression, no knocking or smoking. Transmission setup has around 4000 miles on it.

    The bad is, car needs a new cowl panel & windshield, as the windshield has a crack from a rock flying up on the highway, the cowl panel was just worn out like most of them are, so he pulled it off for now. Car still has stock suspension because of his Wife wanting it to ride stock (she drove the car quite a bit over the years as well). Car has a few scratches and stuff here and there, but nothing crazy.

    Car ran a [email protected] with a 1.68 60 ft in the 1/8, highest mph was 109.73, thats on PUMP GAS, 17's, and barely leaving with any boost. It has not been back on the track since doing the race gas tune.

    He has had the car since 03, and has put alot of money into it, and just wants to sell it to invest more into his new business. He is looking for around $15k, could easily be a low 9 second car with some suspension work.

    Serious inquires only. Car is located in NW Florida area.

    Here is the 18 PUMP GAS dyno video from over a month ago, pics coming soon, but this video will give you an idea. Car currently has projector style head lights (I know lol) instead of the faded yellow ones in the video.

    http://www.youtube.com/watch?v=DwWXDf4-bl8

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2
    Senior Member Array Snorman's Avatar
    Join Date
    Jan 2004
    Location
    New Jersey
    Posts
    1,210

    Default

    Are there any decent pics of the car to include the interior?
    S.

  4. #3
    Senior Member Array
    Join Date
    Oct 2006
    Location
    Houston,Tx
    Posts
    104

    Default

    Wish he was local :(

  5. Remove Advertisements
    ModularFords.com
    Advertisements
     

  6. #4
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default

    Quote Originally Posted by Snorman View Post
    Are there any decent pics of the car to include the interior?
    S.
    I need to get some, he doesnt have a camera. He opened a new repair shop, so he has been busy with that during the week.

  7. #5
    Senior Member Array Snorman's Avatar
    Join Date
    Jan 2004
    Location
    New Jersey
    Posts
    1,210

    Default

    I'm really interested in this car. Is there any contact info or additional pictures? I'm in central Florida and can probably make arrangements to see it in the next week or two.
    S.

  8. #6
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default

    I will PM you his number. He needs to get pics of it, but is slammed during the week with the shop he opened. Im sure we can get it done though.

  9. #7
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default

    New cash price is $10000!

    New price is $10000 CASH

    or

    POSSIBLE TRADE for a decent modded black/white/calypso/reef blue lx hatch or notch, or black 91-93 GT or black/white 94-95 Cobra (no automatics, no red interior, no verts, no carb cars, must have ac and heat) and at LEAST $5000 or MORE. Otherwise, it's $10000 CASH, this is the best deal you will find on a car with a built motor, turbo, built auto, fuel system, making this kind of power! Trade may also be considered straight up for a 99 up black/white/nassau blue/electron blue/grey C5 Corvette with a 6 Speed, or an 03 Cobra.



    Pics and cold start/idle video, and race gas dyno can be seen in the ad here
    http://forums.corral.net/forums/show....php?t=1261802

  10. #8
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default

    Deposit accepted

  11. #9
    Senior Member Array
    Join Date
    Apr 2006
    Location
    Pensacola, Fl
    Posts
    797

    Default

    Sold!

  12. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread

Similar Threads

  1. 80mm Turbo Kit!
    By Red BOLT in forum Power Adders
    Replies: 1
    Last Post: 07-12-2010, 01:38 PM
  2. 80mm single turbo for 03-04
    By graysnake in forum Turbo Modular
    Replies: 32
    Last Post: 12-21-2009, 01:38 AM
  3. i just installed my new 80mm turbo
    By bobby1110 in forum 2005 - 2010 Mustang GT
    Replies: 63
    Last Post: 08-31-2009, 06:07 PM
  4. 80mm+ Turbo Fitment
    By B00ST00 in forum Turbo Modular
    Replies: 6
    Last Post: 02-20-2008, 05:04 AM

Tags for this Thread