My new inlet for my 1.7L

+ Reply to Thread
Results 1 to 8 of 8
  1. #1
    Member Array
    Join Date
    Nov 2010
    Location
    Washington, MO
    Posts
    87

    Default My new inlet for my 1.7L

    Well I saw Ken03HBGTvert's new inlet so I made my own for my 1.7. It may not look as good as his but think it turned out pretty good. I made it so the TB is in almost the exact same posistion/angle as an 03/04 cobra.. The only difference is mine sits a little higher so I can remove my aeromotive fuel rails without removing the inlet.

    In the process of tuning now. It takes some extra effort with the dashpot bc this thing flows soo much more air. should be don tuning this week.



    Here is the finished product installed.


    Will post gains when i have time to get it on a dyno.
    Last edited by Willy Mo; 04-23-2012 at 12:49 PM.

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2
    "Do Work" Array Evil_GT's Avatar
    Join Date
    May 2008
    Location
    STL, MO
    Posts
    1,646

    Default

    Looks good man! Can't wait to see the results.

  4. #3
    Senior Member Array Ken03KBGTvert's Avatar
    Join Date
    Dec 2005
    Location
    Maryville, TN
    Posts
    1,413

    Default

    NICE!!!!! How did you bolt it on without a removable lid to access them?

  5. Remove Advertisements
    ModularFords.com
    Advertisements
     

  6. #4
    Member Array
    Join Date
    Nov 2010
    Location
    Washington, MO
    Posts
    87

    Default

    look at the last pic there is a removable lid.

  7. #5
    Senior Member Array Ken03KBGTvert's Avatar
    Join Date
    Dec 2005
    Location
    Maryville, TN
    Posts
    1,413

    Default

    Oh shizzle, it's upside down in the other picture. OK LOL I see it now.

  8. #6
    Member Array
    Join Date
    Nov 2010
    Location
    Washington, MO
    Posts
    87

    Default

    UPDATE:

    Its been a long time since i posted. Long story short i blew the factory motor. IAC tube came off CAI and made a few WOT pulls and BOOM. so new motor is in and tuned with a 2.38" pulley.
    Forged bottom, TFS heads and large blower cams.

    idle vid
    http://www.youtube.com/watch?v=apvSDmpAhEI
    Short pull vid. Spun in 1st and short shifted. shor shifting teh rest of the gears trying to get used to the WOT box. (which in not being used duing this pull)
    http://www.youtube.com/watch?v=CMySIgzPXhI

  9. #7

    Default

    so where's the dyno sheet?

  10. #8

    Default

    What idler pulleys are those?

  11. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread

Similar Threads

  1. My new kb 2.6l inlet
    By modularman in forum 1999 - 2004 SVT Lightning and 2001 - 2003 Harley Davidson F150
    Replies: 1
    Last Post: 08-14-2010, 01:31 PM
  2. 3.4 Whipple Inlet
    By Stu'sWS6 in forum Power Adders
    Replies: 2
    Last Post: 02-26-2009, 03:01 PM
  3. 2.6 & 2.8 KB inlet ?s
    By TREESE in forum 2003 - 2004 SVT Mustang Cobra
    Replies: 13
    Last Post: 10-29-2006, 09:42 PM
  4. kb inlet?
    By stangfreak in forum 2003 - 2004 SVT Mustang Cobra
    Replies: 8
    Last Post: 12-15-2004, 05:22 PM
  5. Replies: 6
    Last Post: 03-14-2004, 11:30 AM