+ Reply to Thread
Results 1 to 1 of 1
05-29-2013, 03:25 PM #1
BMR Releases New Product - 1" Lowering Springs for 79-04 MustangBMR Suspension
1” Lowering Springs for 1979-2004 Mustangs
Improve the stance and handling capabilities of your 1979-2004 Mustang with a set of Lowering Springs from BMR Suspension. The front springs lower the vehicle by 1” and have a linear spring rate of 525 pounds per inch. The rear springs also lower the vehicle by 1” and have a linear spring rate of 235 pounds per inch. All BMR springs are cold wound from high tensile silicone chromium spring wire then shot-peened and computer tested for consistency. A set of BMR Lowering Springs (SP027) will lower the center of gravity and dramatically increase the cornering capabilities of your Mustang without sacrificing ride quality. Front springs and rear springs also sold separately. Installation time of 3-4 hours. Available in red powdercoat finish.
To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email [email protected], or contact them at BMR Suspension, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.
Sponsored Links Remove Advertisements
By BMR Tech in forum 2003 - 2004 SVT Mustang CobraReplies: 5Last Post: 06-02-2013, 03:04 PM
By BMR Tech in forum 1996 - 2004 Mustang GTReplies: 0Last Post: 05-29-2013, 03:13 PM
By BMR Tech in forum 1996 - 1998 SVT Mustang CobraReplies: 0Last Post: 05-29-2013, 03:10 PM
By BMR Tech in forum 2003 - 2004 Mach 1 MustangReplies: 0Last Post: 05-29-2013, 03:06 PM
By BMR Tech in forum BMR SuspensionReplies: 0Last Post: 04-19-2013, 01:49 PM