Mustang and Ford Performance Forums banner
1 - 11 of 11 Posts

· Registered
Joined
·
554 Posts
Even though im sure the engine was being used for mock-up purposes.. since exhaust and upper intake have only spot welds on them.. it doesn't help your cause of never been raced... when people see a motor plate, sheet metal upper, what appears to be a t-6 turbo with 5' exhaust, aftermarket fuel rails and a moroso aluminum pan.. :) if you are including everything in the first pic for $4000 it might sell.. but if you only want to get that for the long block........ damn....... $4000 for a stock block ain't going to happen, but never hurts to try.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top