Mustang and Ford Performance Forums banner
1 - 10 of 10 Posts

28 Posts
Discussion Starter · #1 ·
D1SC High Output Procharger Tuner Kit

• Installed by J&J Speedshop in the spring of 2010, the car has most recently dynoed at 482 rwhp and 428 rwtq on 10 psi and ran 11's in full weight street trim.
• Over the Summer of 2012, the kit was fabricated to operate with a wastegate which helps the car arrive and remain in its powerband sooner. Currently, the car is wastegated at 12 psi and sees full boost at 4,700 RPM.
• Car has been tuned in person and remotely by Eric Brooks who I recommend to anyone for tuning upon purchase.
• Kit will include: D1SC head unit, ProFlow bypass valve, Tial MV-R Wastegate, all necessary brackets, connectors, hardware, and quick connect wiring harness, all necessary fittings, lines, and belts, Air to Air intercooler, all necesary charge piping, Diablosport Mafia, Procharger coolant degas tank, Procharger slim radiator fan, all blower pulleys I own, and the instruction manual.
• Purchaser is responsible for providing injectors, spark plugs, upgraded fuel pump/boost-a-pump, and a tune.
• Asking $4,000 or reasonable offer

Kook's Long Tube Headers

Kooks long tube headers and O/R mid pipe for a manual 05-09 S197. The Headers have the larger primaries (1-3/4") and collectors (3"). Additionally, they have an extra bung welded for a wideband o2 sensor. The O/R H pipe is 3" to 2 1/2". I am asking $825 for the headers and 400 for the mid pipe. I will sell them together for $1,125.

All parts are still on the car, but if I can find an interested buyer I will take the car off the road early to take everything off of it.
1 - 10 of 10 Posts