+ Reply to Thread
Results 1 to 8 of 8
Thread: Open Loop at Idle
03-15-2015, 10:46 PM #1
Open Loop at Idle
Does anyone know how to keep the ECU in open loop just at idle, but go closed loop when off idle? With the long tube headers the oxygen sensors are taking minutes to come up to temperature. If the ECU drops into closed loop before the O2 sensors are ready the AFR will spike rich and die. Right now I have the time to closed loop based on ECT at 300 seconds and it's working, but I'm wondering if there is a better way.
03-16-2015, 12:07 PM #2
Not hard to tune the car to run in open loop all the time.
Mine has been that way since 05.
03-16-2015, 02:17 PM #3
Agreed, but I don't need open loop all the time. I just want open loop when the car is stationary and idling. The oxygen sensors are taking minutes to warm up and in cold weather are actually cooling off during idle. The long tubes are really messing with them.
03-16-2015, 08:52 PM #4
This looks like it may be able to do what your wanting.
open-closed loop: load for open loop decels
03-17-2015, 01:07 PM #5
Thank you I'll look at that. I also started tweaking the dashpot settings. So glad I kicked the tuner to the curb and tuned it myself.
03-22-2015, 06:52 PM #6
On my car there is a function called "Fuel Open Loop TP". It's RPM on the left and TP on the right.
Set the TP to 0 and RPM to the point you want to go open loop at. When I played with this I had it set like this:Code:
RPM TP == ==== 5000 0 4000 125 3000 250 2500 250 800 250 799 0
03-22-2015, 07:08 PM #7
Awesome. That makes sense. Thank you.
10-09-2019, 08:07 PM #8
- Join Date
- Feb 2007
1997 Cobra will not go into closed loop, my tuner cannot fix it he gave me a base tune it starts and idles good but thats all. now i have this problem with the fuel pump power supply at 6.5 volts i changed the ccrm and now its at 8.3 I dont use the original fuel pump power source anymore since when this started i bypassed the ecu and ran power to the pumps and works fine but it will still not go into closed loop. should i get a new base tune and from who. its been like two years now and i am like almost at wits end. i am running a JT Trim 23lbs 675 at the wheels. and that was when i had the original heads on it now i have stg 3 heads from mmr and stg cams. i cant remember when the last time i got on it but it pulls forever and i just want to drive it. so any help would be appreciated.
By BTPJG in forum 2003 - 2004 Mach 1 MustangReplies: 31Last Post: 07-13-2011, 09:11 PM
By 4.6LPoppy in forum 2005 - 2010 Mustang GTReplies: 11Last Post: 11-10-2010, 02:33 PM
By mustangtw5901 in forum Tuning and DiagnosticsReplies: 4Last Post: 12-14-2009, 06:19 PM
By TurboHatch in forum Tuning and DiagnosticsReplies: 6Last Post: 09-20-2008, 08:49 AM
By Boosted98GT in forum Tuning and DiagnosticsReplies: 20Last Post: 02-20-2007, 03:18 PM