Rebuilding a T45 trans... their is a soultion

+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Default Rebuilding a T45 trans... their is a soultion

    So I am currently rebuilding my t45 from my GT. Before I started I was searching for a service manual to help guide me thru the first tear down and rebuild. My searches resulted in a few explosion diagrams and home made how to's. Saw on some sites that their were T5 and T56 service manuals on Tremecs' site but nothing for the T45. I ended up getting in to contact with a service engineer at Tremec and he sent me over the Ford service manual for rebuilding them. It has all torque specs, tools needed, tolerances, and step by step instructions. If anyone wants/needs it , it is in the attachments along with a t5 and t56 service manual.
    Thanks
    Nick
    Attached Images Attached Images

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2
    Senior Member Array BlueScreen's Avatar
    Join Date
    May 2009
    Location
    Canada (Quebec)
    Posts
    1,036

    Default

    Thanks a lot. Very helpful

  4. #3

    Default

    Thanks!! Much appreciated!

  5. Remove Advertisements
    ModularFords.com
    Advertisements
     

  6. #4

    Default

    Very good information. Thank You!

  7. #5

    Default

    Awesome, thanks Nick!

  8. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread

Similar Threads

  1. Trans harness from a 3650 vs T45?
    By Fatstang in forum 1996 - 2004 Mustang GT
    Replies: 0
    Last Post: 08-14-2011, 04:46 PM
  2. 96 Cobra T45 Trans
    By foxlincoln in forum Drivetrain Parts
    Replies: 0
    Last Post: 10-18-2009, 09:32 PM
  3. 98 T45 Trans to 96 Cobra T45 Trans
    By seanisbond in forum 1996 - 2004 Mustang GT
    Replies: 2
    Last Post: 06-07-2009, 03:51 PM
  4. tremec t45 trans
    By d_stang in forum Drivetrain Parts
    Replies: 0
    Last Post: 07-30-2008, 05:10 PM
  5. T45 trans and clutch
    By junker in forum Drivetrain Parts
    Replies: 3
    Last Post: 01-17-2008, 08:31 PM