Mustang and Ford Performance Forums banner
1 - 1 of 1 Posts

·
Registered
2008 mustang gt
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey everyone, I'm currently on the tail end of the first 4.6 3v swap into a 240sx and im having some issues that I hope someone on here can answer. First off I have everything from the doors forward(wiring wise) from the 2007 mustang gt donor car. I have all the wiring hooked up, everything turns on(including cluster). PATS is disabled via HP tuning. I have 51 pounds of fuel pressure at the rail. All of my 5v common connections are good except my fuel injectors. It's reading 34v which is crazy cause the car can't even make that if it wanted to. To get to the point I got it turning over and everything but for some reason I'm not getting any rpm signal. It's also throwing a P2104(throttle actuator control system forced idle) I don't have the gas pedal yet as its in the mail but I've read that this wouldn't make it not start. Anyone have any ideas? I'm at a loss. Picture of the car just cause I know someone will be curious.
 

Attachments

1 - 1 of 1 Posts
Top