K member swap to 4.6

+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Default K member swap to 4.6

    Hi all, I have a 79 mustang which isn't covered on this site but it's a fox and not much difference but anyways, I'm in the process of swapping a 97 gt K member into it as I have a complete car, my question is will I have any issues running the stock fox control arms with the sn95 K memeber? I read that the fox arms are 13" and the sn95 arms are 14". I did the 5 lug swap about 5 years ago with stock 79 front suspension with 97 gt spindles and 01 gt pbr calipers, will I have issues running the fox a arm, I don't want to push the front tire way out and my fox a arms have newer sn95 ball joints as well as new poly bushings, what will my outcome be with fox control arms on the sn K member?

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2

    Default

    it should bolt on without issues, i did the opposite, 79-04 K member will bolt on, i used to have a 04 GT and i dropped a 351W in it using a 92 GT K member

  4. #3

    Default

    Well the 97 spindles on fox arms will push the wheels outboard a little bit. 94-95 spindles will keep the stock fox track width

  5. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread

Similar Threads

  1. why does everyone swap out the K member?
    By warsawmanus in forum Modular V8 and V10 Conversions and Swaps
    Replies: 21
    Last Post: 03-16-2010, 09:10 PM
  2. PA Racing K-member swap
    By posi in forum 2003 - 2004 SVT Mustang Cobra
    Replies: 42
    Last Post: 06-15-2009, 08:49 AM
  3. 79-93 AJE 4.6 Swap K-member
    By Black10thSVT in forum Modular V8 and V10 Conversions and Swaps
    Replies: 2
    Last Post: 05-20-2008, 11:59 PM
  4. Best Swap K-Member Available?
    By DropDTop in forum Modular V8 and V10 Conversions and Swaps
    Replies: 13
    Last Post: 11-25-2006, 09:35 AM
  5. Need a K-member for my 4.6 to fox swap!!
    By jdl1000 in forum Modular V8 and V10 Conversions and Swaps
    Replies: 22
    Last Post: 12-18-2004, 10:03 AM