+ Reply to Thread
Results 1 to 7 of 7
Thread: Coolant Crossover Delete
05-07-2018, 08:38 AM #1
Coolant Crossover Delete
Finally running again after sometime. Started with a clutch upgrade and lead to a bunch of other stuff.
One of which was a coolant crossover delete and custom thermostat before the radiator. -16 AN fittings and lines out of the heads to the thermostat and -20 AN fittings and line from thermostat to radiator. The thermostat block houses the coolant temperature sensor and return for the water cooling from the turbo.
The thermostat block it hidden and attached to the passenger side frame rail.
Last edited by Onelfastlride; 05-07-2018 at 08:44 AM.
05-07-2018, 10:14 AM #2
Very nice work, Matt. Super clean just like the rest of the car;)
05-13-2018, 02:09 PM #3
- Join Date
- Aug 2006
- Fort Lauderdale, FL
Any more details on how you did the custom thermostat? I am still using the stock t-stat housing/location, I am sure there are some gains to be had doing a custom t-stat setup
05-14-2018, 12:10 PM #4
damn that looks good!
whered you get the 16an pieces where they insert into the heads?
05-15-2018, 10:03 AM #5
06-02-2018, 07:45 AM #6
All lines an AN fittings are Vibrant Performance
-16 AN head fittings are MMR
Thermostat housing holds stant chevy 160 deg stat (w/ no issues) and the thermostat was designed by me and http://www.ipsco.org and then built.
Making it fit and being hidden took sometime with lots of trial and error.
06-06-2018, 08:06 AM #7
Vendor Sale!!! MMR Coolant Crossover Delete Fitting KitBy Mod Mustang Racing in forum Turbo ModularReplies: 29Last Post: 03-15-2018, 12:48 PM
By Juiced46 in forum 2003 - 2004 SVT Mustang CobraReplies: 7Last Post: 05-19-2016, 10:42 PM
By 99TTGT in forum Engine PartsReplies: 1Last Post: 09-16-2015, 02:00 PM
By dlott33 in forum Modular V8 and V10 Conversions and SwapsReplies: 3Last Post: 12-10-2010, 07:12 PM
By SaleenCobra425 in forum Turbo ModularReplies: 0Last Post: 04-26-2007, 03:22 PM