Mustang and Ford Performance Forums banner

Motor Mounts DIY

2K views 2 replies 2 participants last post by  XSELLR8 
#1 ·
Hi everyone. Here is my video on installing new motor mounts. Hopefully it's a helpful resource for someone. There are several ways to go about it, so keep that in mind.
 
#2 ·
Easiest way to do the motor mounts is to just remove the k member. If you do it any other way then its going to be a head ache. I can have the K member out in less than an hour so in my mind, it does not make sense to do it any other way.

Tire Automotive tire Automotive lighting Wheel Motor vehicle
 
#3 ·
Easiest way to do the motor mounts is to just remove the k member. If you do it any other way then its going to be a head ache. I can have the K member out in less than an hour so in my mind, it does not make sense to do it any other way.

View attachment 170493
I agree. Thats how I did it in the video, though for 2V owners they may be able to lift the engine with more clearance. This is by far the best for DOHC cars in my opinion. :rock:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top