Mustang and Ford Performance Forums banner

New Member in New Castle DE

739 views 2 replies 3 participants last post by  bull_dog190 
#1 ·
Hello everyone. I would like to introduce myself to the group. I own a 2003 Dark Shadow Gray Mach 1 and live in New Castle DE.
I have a question as i would like to install a set of stage 2 cams. I need to replace the chain tensioners so while i have this work going on i thought i would do the rest of the work. Can anyone tell me if i need to have the heads done as well for clearances? Any advice would be appreciated. Also what would be the best cams to use?
Thanks Mark
 
#2 ·
I need to replace the chain tensioners so while i have this work going on i thought i would do the rest of the work.
What is the rest of the work you are referring to?

Can anyone tell me if i need to have the heads done as well for clearances?
If the "done" you are talking about is a valve job it would not hurt depending on the condition of the valves and seats right now.

If the "done" is not a valve job, what is the "done" you are talking about?

... what would be the best cams to use?
Thanks Mark
Most likely the 96 - 98 Cobra cams.

Ed
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top