Perfect Covid19 project: Polishing Valve Covers and Upper Intake

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Senior Member Array cobraracer46's Avatar
    Join Date
    May 2006
    Location
    Blue state
    Posts
    390

    Default Perfect Covid19 project: Polishing Valve Covers and Upper Intake

    Name:  PQGA5678.jpg
Views: 46
Size:  110.6 KB

    Hand polishing Mod Motor parts is the perfect project for these difficult times when we have hours to spare because its a time consuming project. The process to do the job is simple: remove the factory paint with aircraft stripper, hand sand
    with 120, 250,400, 1000 3000 sand paper and then use mothers paste polish. I'm happy with how this project turned out and its good training for smoothing and polishing the inside and outside of the Teksid block at rebuild time.

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2
    Senior Member Array cobraracer46's Avatar
    Join Date
    May 2006
    Location
    Blue state
    Posts
    390

    Default

    Name:  IUPW6342.jpg
Views: 40
Size:  41.4 KB

    A polished Teksid block. Just think about the hours its going to take !

  4. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread