Mach 1 Combos/Times

+ Reply to Thread
Page 1 of 5 12345 Last
Results 1 to 15 of 72
  1. #1
    Senior Member Array Shoey's Avatar
    Join Date
    Nov 2003
    Location
    Las Vegas
    Posts
    5,969

    Default Mach 1 Combos/Times

    Come on you Mach 1 guy's....post up your combos and times for other people to shoot for.

    I know some of you have some sick Mach's....let's see the #'s.

    You road race guys are welcome also, you guy's are over shadowed a lot buy the drag guy's. Here is a combo/times thread for you also.




    Format:

    Name
    Make/Model/Year
    Track Name
    Time
    Modifications
    Sponsors
    Last edited by Shoey; 03-27-2007 at 08:55 PM. Reason: 1 suck at t3h tiping

  2. Remove Advertisements
    ModularFords.com
    Advertisements
     

  3. #2
    Senior Member Array Shoey's Avatar
    Join Date
    Nov 2003
    Location
    Las Vegas
    Posts
    5,969

    Default Re: Mach 1 Combos/Times

    I will go through and make everyone's post into one "information" post every now and then to make the information easier to read.

    Thanks for making Modular Fords one of the best sites on the net!!

  4. #3
    Snake Bitten Moderator Array speedofsound's Avatar
    Join Date
    Oct 2004
    Location
    South Texas
    Posts
    1,625

    Default Re: Mach 1 Combos/Times

    everyone take time to list there mods. don't keep secrets.... not like the chebbie boys. here are all mine....

    Name: Robert Overfield
    Make/Model/Year: 2003 TR-Mach 1 5-speed
    Track Name: Guam International Raceway
    Time: 11.689 @ 118.131 w/ 1.667 60ft
    Modifications:
    C&L true flow CAI
    PHP spacer
    SpeedofSound Motorsports ported intake
    SpeedofSound Motorsports tuned
    longtubes w/3" collectors
    3" o/r true x
    magnapack cat-back
    NX kit w/ all the bells and whistles
    4.10
    hotchkis adj uppers
    hotchkis lowers
    D&D performance SHD clutch
    tri-ax
    Sponsors: SpeedofSound Motorsports

    all else is bone stock... even the race weight. right down to still installed jack and spare.

    waiting on my Crower stage 3's right now from Jared at Lethal. i got a Fastest Street car event that i'm sponsoring and running and raceing in at the end of April. hopefully all goes good with the cam install and my Mach rips.... gotta represent

  5. Remove Advertisements
    ModularFords.com
    Advertisements
     

  6. #4
    Senior Member Array Angus's Avatar
    Join Date
    Feb 2003
    Location
    AL
    Posts
    885

    Default Re: Mach 1 Combos/Times

    Name: Angus/Angus66
    Make/Model/Year: Ford/Mach 1/2003
    Track Name: Cecil County Dragway
    Time: 11.354 @ 119.94 mph (Naturally-Aspirated)
    Modifications:

    Engine:
    Dyno Tune
    EGR Delete
    PHP Intake Spacer
    Electric water pump
    Custom-Made Cold Air Kit
    Ported Mach 1 lower intake
    Polyurethane Motor Mounts
    Driver-Adjustable Two-Step
    Alternator & p/s Underdrive Pullies
    NX 100 or 125-shot w/Safety Accessories

    Exhaust:
    SLP long-tubes
    SLP catless X-pipe
    Magnaflow Catback

    Weight reduction:
    A/C Delete
    No Passenger seat
    Lightweight Battery
    Lightweight driver seat
    Self-Made Rear Seat Delete
    Rear Mach 1 Sub Box removed
    No front sway bar, jack, spare tire
    Trunl Panels & Underhood liner removed
    Front & rear bumper support brackets + foam removed
    Stock radio/CD player replaced w/aftermarket gauges & panel

    Tires/Wheels:
    M/T ET Drag slicks
    Moroso DS-2 Front-Runners
    Centerline Warrior 15" Wheels
    (15" X 4" & 15" X 10")

    Transmission:
    Fidanza Aluminum Flywheel
    Mcleod Clutch & Pressure Plate
    Pro-Motion TKO Shifter (Steeda-Made)
    26-Spline TKO 500 Trans (Face-Plated)
    Adjustable Clutch Cable & Firewall Adjuster

    Suspension/Chassis:
    MM Full Length SFC's
    MM Caster/Camber Plates
    MM Adjustable anti-roll bar
    AJE Tubular K-member & A-Arms
    Welded Torque Boxes/Axle Tubes
    Front Coil-Overs with 175lb springs
    Adjustable Drag Struts & Drag Shocks
    Adjustable rear upper/lower control arms

    Rear:
    4.56 gears
    33-spline Moser Axles
    33-spline Moser Spool
    T/A Cover with bearing cap supports

    Misc:
    SLP Line Lock
    Manual Fan switch
    Programable/Recording Shift Light

    Sponsor: My checking account


    A video of my best N/A run can be found HERE.
    Last edited by Angus; 03-31-2007 at 07:14 AM.

  7. #5
    Senior Member Array INDY's Avatar
    Join Date
    Sep 2006
    Location
    between the shop and the track
    Posts
    120

    Default Re: Mach 1 Combos/Times

    Name-Shane Baker

    Make/Model/Year-Ford Mach 1 2003 Black Automatic

    Track Name- Speed World Phx AZ

    [email protected] W/2.0 60ft (before Billet T/C and built trans)

    Modifications
    Billet T/C 3500stall and built trans from BC Automotive
    Bass. cat back
    Mac o/r h-pipe
    K&N filter
    C&L tube only
    3.90 gears
    Nitto DR's
    Small shot on the bottle
    NGK TR6 plugs
    SCT switch chip (custom tuned by Devin @ Performance Solutions)
    UCA
    FSB removed

    Sponsor-Performance Solution
    Last edited by INDY; 04-02-2007 at 02:08 AM.

  8. #6
    Member Array B4THUNDER's Avatar
    Join Date
    Mar 2006
    Location
    Ocean Springs, MS
    Posts
    35

    Default Re: Mach 1 Combos/Times

    Matthew J. Holder "B4THUNDER"
    Ford/Mach1/'03
    No Problem Raceway, LA
    11.35 @ 125.65 mph
    Pro Turbo System Mach 1 Kit (10psi)
    Stock motor (@ the time of the run)
    Nitto DRs
    31 Spline Axles
    Sponsor: ProTurboSystems.net

  9. #7
    Senior Member Array TheBlkMach1's Avatar
    Join Date
    Apr 2005
    Location
    west palm beach, fl.
    Posts
    275

    Default Re: Mach 1 Combos/Times

    Name: Chris
    '03 Mach1 5spd.

    Track: Bradenton Motorsports Park
    1/4 mile: 10.88 @ 133.82 w/ 1.72 60'

    Mods:
    Engine: Diamond Pistons, Manley Rods, Cobra crank, 8.5:1 CR
    Intake: Ported stock
    TB: ported BBK twin 65mm[/b]
    Power adder: Procharger D1 w/ 3.1 RR pulley @ 22#'s
    Fuel system:Ford GT pumps, -8 line, 1/2 CPR fuel rails, Siemens 60lb. inj.
    Drivetrain:Stock T-3650, Centerforce Dual Friction clutch, Fidanza aluminum flywheel, Steeda Tri-Ax shifter, aluminum driveshaft, Moser 31 spline axles, Eaton posi rear, 4.10 gears, welded torque boxes and axle tubes
    Exhaust: Bassani mid-length headers & o/r x-pipe, Borla Stinger catback
    Suspension: UPR k member, a-arms, coil overs(F), Eibach Sportline springs(R), Steeda U/LCA's, Steeda full length subframes
    Sponsor: Myself
    Here's a vid of the run: theblackmach1.flv - Video - Photobucket - Video and Image Hosting

    Car now has an F1A and 3.73 gears and stock TB. No new times with this setup.

  10. #8

    Default Re: Mach 1 Combos/Times

    NAME : CHRIS KACZYNSKI / OU812MACH1
    MAKE/MOD./YEAR : 2004 MACH-1 AUTOMATIC AT/4
    TRACK NAME : MOROSO MOTORSPORTS PARK, WESTPALM BEACH FLORIDA
    ET./ MPH :13.5 @103.19
    MODS : S.C.T. CUSTOM PROGRAMMER{McDonald motorsports}, MAC/PACIFICA O/R X-PIPE, REMOVED AIR SILENCER, everything else factory stock
    TIRE : GOODYEAR 245/45/17 FACTORY RUBBER @19PSI
    SPONSOR : NONE
    Last edited by OU812MACH1; 04-23-2007 at 08:45 AM.

  11. #9
    Senior Member Array LXH89's Avatar
    Join Date
    Dec 2002
    Location
    Houston, Tx
    Posts
    374

    Default Re: Mach 1 Combos/Times

    Name: Tony
    '03 Mach1 5spd, Oxford White, IUP

    Track: Houston Raceway Park
    1/4 mile: [email protected] /w 1.58 60' (on 26x10.5 ET Streets)

    Mods:
    JLT RAI
    Mac 2.5" Pro-Chamber
    FRPP Aluminum driveshaft
    Fidanza Aluminum Flywheel
    D&D SHD Cobra Clutch
    Moser 31-Spline Axles
    SCT PRP
    NOS 5115/5116 Hybrid Dry Nitrous Kit (150 shot)
    Sponsor: None

  12. #10
    Senior Member Array ChuckP's Avatar
    Join Date
    Feb 2007
    Location
    Fayetteville, NC
    Posts
    189

    Default Re: Mach 1 Combos/Times

    Name: Chuck Ritter
    Make/Model: White 04 Mach 1 5spd
    Track Name: Fayetteville Motorsports
    1/4 Mile: 13.090

    Mods:
    See signature below

    Still running on street tires, DR's coming soon.

  13. #11

    Default Re: Mach 1 Combos/Times

    Nick H., Bonsall, CA
    '03 Oxford White, 5 spd

    Vortech @ 10 psi
    no cooler
    home ported intake
    stock longblock
    Bassani ML headers
    Nitto 275 DRs
    Eiback springs
    Maximum LCAs
    SCT PRP
    everything else STOCK
    full weight
    granny shifted
    11.97 @ 121 on only a 2.0 60 ft.

    Great drag race combos you guys posted above. These are amazing cars.

  14. #12
    Senior Member Array
    Join Date
    Feb 2006
    Location
    Puerto Rico
    Posts
    241

    Default Re: Mach 1 Combos/Times

    Guillermo Esteves
    Caguas, P.R.
    Oxford White, 5spd

    Track: Salinas Speedway, P.R.
    1/4 mile : 12.81 @ 108 with a 1.89 60 ft (BFG drag radials 275/40-17)
    Mods:
    JLT & K/N intake
    PHP intake spacer
    Bassanni full exhaust
    4.30 gear
    Moser 31 spline axles
    SCT x2
    FRPP aluminum driveshaft
    Granny shifting

  15. #13
    Senior Member Array robjr67's Avatar
    Join Date
    Aug 2006
    Location
    Stafford, VA
    Posts
    258

    Default Re: Mach 1 Combos/Times

    Name: Rob Rowland
    Make/Model/Year: 03 Mach
    Track Name: MIR, MD
    Time: [email protected]
    Modifications: 2.1 KB, UPR X-Pipe, Magna Flow Cat Back; SCT Tune, 4:10 gears.

  16. #14
    Junior Member Array
    Join Date
    Dec 2006
    Location
    Ky
    Posts
    11

    Default Re: Mach 1 Combos/Times

    Ryno
    '03 AB 5spd w/IUP
    Clay City, Ky

    Time: 13.027 @ 109mph
    1.9x 60ft

    Mods:

    PHP Intake spacer
    K&N Filter only
    Steeda timing adjuster +4 advance
    2 1/2" Prochamber catless
    2 1/2" Bassani mufflers welded in
    245/45 Nitto DR's

    that's it. car made 297/329 as above. NO TUNE
    now has Dr Gas catless X, but doesnt feel any different,
    just like the way it sounds. Awaiting 4.10's, Bassani ML's plus
    matching X, cams, and ported heads..

  17. #15
    Senior Member Array INDY's Avatar
    Join Date
    Sep 2006
    Location
    between the shop and the track
    Posts
    120

    Default Re: Mach 1 Combos/Times

    Quote Originally Posted by INDY View Post
    Name-Shane Baker

    Make/Model/Year-Ford Mach 1 2003 Black Automatic

    Track Name- Speed World Phx AZ

    [email protected] W/2.0 60ft (before Billet T/C and built trans)

    Modifications
    Billet T/C 3500stall and built trans from BC Automotive
    Bass. cat back
    Mac o/r h-pipe
    K&N filter
    C&L tube only
    3.90 gears
    Nitto DR's
    Small shot on the bottle
    NGK TR6 plugs
    SCT switch chip (custom tuned by Devin @ Performance Solutions)
    UCA
    FSB removed

    Sponsor-Performance Solution


    UPDATE:
    I ran a 12.304 @ 112 with a 1.85 60' time last weekend on a 100 shot!!!!!!!!!!!!! Heading back out this weekend to hunt down that 11sec slip. I left a lot on the table on that pass, I don't plan to leave anything on the table this wekend.

  18. Remove Advertisements
    ModularFords.com
    Advertisements
     

+ Reply to Thread
Page 1 of 5 12345 Last

Similar Threads

  1. H/C/I Combos... Who is running what?
    By Phil Jacques in forum 1996 - 2004 Mustang GT
    Replies: 14
    Last Post: 11-10-2010, 12:21 PM
  2. Nitrous Combos
    By Magic in forum 1996 - 1998 SVT Mustang Cobra
    Replies: 1
    Last Post: 12-30-2007, 01:03 PM
  3. exhaust combos?
    By da_boss in forum 2003 - 2004 Mach 1 Mustang
    Replies: 1
    Last Post: 10-21-2005, 09:41 PM
  4. Cool Mach 1 T-Shirts & Hat combos
    By BgDaddy in forum 2003 - 2004 Mach 1 Mustang
    Replies: 0
    Last Post: 04-20-2004, 02:46 PM
  5. Post your Mach 1 quarter mile times!
    By Turboniam in forum 1996 - 2004 Mustang GT
    Replies: 11
    Last Post: 12-10-2003, 07:04 AM