Hey guys i'm pretty new here to the whole ford world. I have general automotive knowlege but not specifically relevant to fords. I'm a little bit stumped here. I've got a FI 302 HO in a 87 mustang coupe. I was driving it 3 days ago then I try to start it and it won't start. I tried replacing the ICM on the distributor and I replaced the starter solenoid as well. When I try to crank it the solenoid just makes a buzzing sound. could I have something wired wrong? I put the ground on one side and the rest of the wires on the other side in the following order.. blue wire, red battery wire, black and white wire attached to the box thing, green wire then yellow wire. What am I doing wrong? Any advice is welcome. Thanks for your time.