Mustang and Ford Performance Forums banner
1 - 3 of 6 Posts

· Registered
1,346 Posts
How did you bleed the MS? Did you start at the bleed scew closest to the firewall first? Also Are you holding pressure on the brakes and then having someone open the bleed screw? Sometimes you have to pump them up and then hold before the screw can be opened. The only time I have had and issue is when I ran the MS dry. Have you gone back over the lines to make sure you are not sucking air back into the system?
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.