Mustang and Ford Performance Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
219 Posts
Discussion Starter · #1 ·
Today i finished installing my new valve covers, i put everything back and tried to start it, it wouldn't start, it just cranks but no turn on. I checked to see if there was fuel pressure and there is. What do you guys think it is?
 

·
Registered
Joined
·
1,465 Posts
Double check all your ground connections. If you have a scanner, see if it will read any codes.
 

·
Registered
Joined
·
572 Posts
i would say double check all grounds, check codes, make sure all coils are secured well and see how that goes.
 
1 - 3 of 3 Posts
Top