Mustang and Ford Performance Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
I ordered Comp Cams VSR stage 2 cams and today I opened the box finally and found the part number on one cam was XE251E-15.5 and the other one was XE261E-15.5

I'm goint to call Brenspeed (who I got the cams from) but were shipped directly from Comp Cam about this but wanted to see if anyone had their paperwork still.

I compared the cam cards inside their respective boxes and they appear to be the same but I still need to verify before I drop them in.

Thank GOD I looked now rather than saturday when I start my install.

If you have your paperwork/cards handy, can you post the part numbers and the cam specs?

thank you.
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #3 ·
When they say on the cam sheet (left side)... is that left side sitting in the drivers seat or left side facing it from the front of the car?

While the specs are the same I would think it would matter in relation to the firing order or are the lobes the same orientation on both sides at the same time?
 
1 - 3 of 3 Posts
Top