Mustang and Ford Performance Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
140 Posts
If you're going for a Crown Vic motor, go for one that is from a 2001 model year or newer to make sure you get the PI motor.

The big difference is that the air intake is on the driver's side on a Vic, so you'll need the air intake parts from your current motor. Everything else should be the same motor-wise.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top