Mustang and Ford Performance Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
Hey guys I recently had both my front turn signals go out on 05 Mustang GT, I have tried everything I know to get them working again replaced the bulbs checked the harness for cracks or split wires, another lil note when I do flip the signal to turn the switch sounds high speed. Any one have this happen to them or know how to fix?
 

· Registered
Joined
·
1,280 Posts

· Registered
Joined
·
1,280 Posts
this may be a tough read, most testing is with an ohm meter. i would check all ares that are connected by plugs/sockets for corrosion, bad grounds. i am guessing your hi-beams work, so kind of rules out switch (maybe). fast signal sound, usually means a bulb is out on the side turned on. if both bulbs are out at same time, you should be looking for a short to ground somewhere. make sure some rodent has not chewed on your wires somewhere
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top