Mustang and Ford Performance Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
556 Posts
Discussion Starter · #1 ·
Hi folks. I have a unique issue here. I thought for sure that I had the MSD DIS-4 setup for manual rev limit set @ 6250. However, today I took the car out and decided to hammer it really hard and noticed that it jumped up near 6500 rpm. = not good for stock part internally hehehe.

Is there something that I should be checking? I looked at all the dipswitches and the DIS is functioning great.

Any advice/comments?

Thanks,
Tim
 
1 - 2 of 2 Posts
Top