[BlownBlu97]

wondering the same thing and also wondering if the Mach1 flows better then an 01 cobra intake. I would think the 03 cobra/procharger conbo would not be a good idea because your dumping air into a box and there is not equal distrubition to the motor because there are no runners.

 

[BlownBlu97]

not sure that is possible since it works for procharger and I guess the same for us only with the intercooler there. I would just think an intake with runners to each cylinder would be more efficient. Can you buy just the upper plenum from procharger? How much for that thing?

 

[BlownBlu97]

Mine is still a street drive stick car and I hope to see 700's on pump and 18 psi with 800+ on race fuel and 22psi plus. Would I be better off loosing my top end in lou of more bottom end do to having runners or will it not be to noticable so run the procharger upper?
My plan was to run a Mach1 intake because I think it will flow a bit better then the 01 Cobra intake.

 

[BlownBlu97]

I'm going with a Mach1 for sure!

 

[BlownBlu97]

I got a 04 Mach1 intake setup for $350 so I wen that route. I'm going to have it tanked then painted with some air brushing. Now I need to figure out what TB to run.