Mustang and Ford Performance Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
Taking apart the cobra due to low compression in one of the cylinders. How do you get the lower supercharger pulley off??
 

·
Registered
Joined
·
889 Posts
Reverse Thread. Hammer And Aluminum Rod Works Great
 

·
Registered
Joined
·
1,687 Posts
Dont forget to swear at it and use a LARGE breaker bar, the whole pulley turns so dont try hold it.
 

·
Registered
Joined
·
603 Posts

·
Registered
Joined
·
5,800 Posts
With a long enough cheater bar its not that hard. If you hold it in place and then he the cheater bar real hard the shock will knock it loose. Mine took like 5 mins to take off but our cheater bar is about 4ft long.
 

·
Registered
Joined
·
1,114 Posts
so when the motor turns it cannot loosen up.......
 

·
Registered
Joined
·
4,061 Posts
I put the cheater bar on top of my floor jack.
It only took a couple of pumps with the jack and "POW" it came loose.
That noise scares me every time I take one off.
 
1 - 9 of 9 Posts
Top