Mustang and Ford Performance Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
401 Posts
Discussion Starter · #1 ·
Metco x-10 Kit

Whipple 3.5" Upper
Various Kenne Bell 2.2 uppers
3 X-10 Idlers
1 X-10 Flanged idler
3.5" Alternator Pulley
3.70" Alternator Pulley
Alternator Pulley spacer
Tensioner 10 rib pulley
Tensioner spacers For Stock and RR manual Tensioner
X-10 Tensioner Brace
6lb Lower
10lb Lower
Metco Lower pulley adjustable Idler Bracket
Billet Flow Idler Bracket
2 10 Rib Napa Belts

X-10 Kit 950+ Ride

RR Manual Tension $250+ Ride

mk
 

·
Registered
Joined
·
1,024 Posts
Metco x-10 Kit

Whipple 3.5" Upper
Various Kenne Bell 2.2 uppers
3 X-10 Idlers
1 X-10 Flanged idler
3.5" Alternator Pulley
3.70" Alternator Pulley
Alternator Pulley spacer
Tensioner 10 rib pulley
Tensioner spacers For Stock and RR manual Tensioner
X-10 Tensioner Brace
6lb Lower
10lb Lower
Metco Lower pulley adjustable Idler Bracket
Billet Flow Idler Bracket
2 10 Rib Napa Belts

X-10 Kit 950+ Ride

RR Manual Tension $250+ Ride

mk
Pm Sent. I'm assuming that the Whipple upper is a 10 rib. I have a very similar setup. Did you have any Iat issues with the 6lb lower/3.5" upper and Hpp modified inlet?
 
1 - 6 of 6 Posts
Top