Mustang and Ford Performance Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
797 Posts
Discussion Starter #1
Modular Head Shop Stage 2.5 Blower/Nitrous Cams & New ARP Cam Bolts, they were installed in the 44cc set of heads, but were NEVER RUN. Specs are
231/238 550/540 110/118 114.

These are TFS Specific cams from Nick McKinney, but can be used in a PI head as well, with a flycut piston if on stock bottom end. He recommends a spring upgrade on TFS Heads if running these and some decent boost at over 6500 rpms. Have cam cards, receipt, and original boxes. Over $600 worth of cams and bolts, sell for $525 SHIPPED

SERIOUS INQUIRIES ONLY PLEASE!

 

·
Registered
Joined
·
797 Posts
Discussion Starter #2
$515 shipped! Only selling because I have no use for these right now!
 

·
Registered
Joined
·
797 Posts
Discussion Starter #3
Make offer!
 

·
Registered
Joined
·
125 Posts
ok I have a s trim on a forged 4.6l 02gt pi heads will these work well my dish is a factory dish but forged pistons I wont have PTV issues if i degree them correct??? if so im very interested!!!!!!!!!
 

·
Registered
Joined
·
797 Posts
Discussion Starter #5
Nick says a stock pi head and stock shortblock wont clear without a piston notch.....
 

·
Registered
Joined
·
797 Posts
Discussion Starter #7
He is on here from time to time
 

·
Registered
Joined
·
797 Posts
Discussion Starter #8
Make offer
 

·
Registered
Joined
·
1,276 Posts
Nick says a stock pi head and stock shortblock wont clear without a piston notch.....
You can make those fit a PI head (no piston notch) with an aftermarket or modified stock intake valve with 1-2 degrees of retard. This is easily done with the $50 TFS crank gears. These cam specs retarded slightly would still be good for a blower/juice car.
 

·
Registered
Joined
·
797 Posts
Discussion Starter #10
There you have it folks!
 

·
Registered
Joined
·
1,276 Posts
In all honesty they would clear as is, but its only about 0.010-0.020" I would guessimate which is not enough for me.
 

·
Registered
Joined
·
797 Posts
Discussion Starter #12
ttttttt
 

·
Registered
Joined
·
797 Posts
Discussion Starter #13
Sold!
 
1 - 13 of 13 Posts
Top