Mustang and Ford Performance Forums banner

1 - 20 of 25 Posts

·
The Ubiquitous Jimmy V.
Joined
·
3,323 Posts
Discussion Starter · #1 ·
Mac Catback
JDM/Kook's Headers
Catted H pipe
Steeda CF Subframes
Steeda Tri Ax Shifter
MGW Handle
Amazon Racing
Custom Diablo Chip
Amazon Racing Wheel Hop kit
3 in. Pulley
Accufab Throttle Body
PHP Cool air Kit
Autometer Lunar Boost Gauge
Raptor Shift Lite
Brembo Cross Drilled Rotors
Nitto Drag Radials
Denso IT 20's Gapped @ 38
467/481 STD
459/470 SAE
[email protected] on F1'[email protected] E town
 

·
Registered
Joined
·
2,736 Posts
What were your 1/8 times and mph's J.V.
 

·
The Ubiquitous Jimmy V.
Joined
·
3,323 Posts
Discussion Starter · #3 ·
Time slip in my car..I'll post it tomorrow..
I remember 93+almost 94MPH to the 1/8
 

·
Registered
Joined
·
124 Posts
Mods are in Sig.

I havent dynoed w/ new pulley and 3 in cat-cack but here is old numbers w/ 2 1/2 exhaust ( stock headers), 2.80 pulley.

458HP
512LB-FT both are SAE
* 20 shot sprayed at 4500 rpms
515HP
540LB-FT " " "

12.2 @ 119.7 1/4
8.0 @ 94.5 1/8 2.07 60ft that was with everything except NOS, new exhaust, lower pulley, and smaller upper. On pump gas 93.
 

·
Registered
Joined
·
191 Posts
Flowmaster American Thunder Catback
No dyno #'s
12.54 @ 114 at Cecil
 

·
Registered
Joined
·
42 Posts
I am dynoing today with my current mods...will post them tonight. But with....

Dr. Gas X-pipe(no cats)
Bassani catback
JDM chip
K&N dropin

433hp/417trq

[email protected]

the cars current best time is [email protected] hopefully I put down some serious horsepower today...hoping for 470-480 horsepower and 480ish torque! Wish me luck!
 

·
Registered
Joined
·
2,736 Posts
Interested to know the results!
 

·
Registered
Joined
·
2,736 Posts
Meat that is the most without a pulley chip or headers that I have heard of! You got yourself a runner:)
 

·
Registered
Joined
·
721 Posts
trey193 said:
Meat that is the most without a pulley chip or headers that I have heard of! You got yourself a runner:)
Yeah it's one of the highest RWHP Snakes I've seen for what few mods I have... I AM a little lean though and I'm sure that accounts for a couple of them extra ponies...



U.M.
 

·
Registered
Joined
·
521 Posts
3" O/R H-Pipe
3" Catback w/2-ch flows
2.80 upper
100mm Billetflow Idler
AR Filter kit
Diablosport Chip
NGK TR6's gapped at .035
Mobil 1 SYN 5w30
Number in SIG are with a nice cool-down
Hot pull was 453/476 SAE
 

·
The Ubiquitous Jimmy V.
Joined
·
3,323 Posts
Discussion Starter · #12 ·
03 Snake...?? Didn't you try Headers?
 

·
Registered
Joined
·
41 Posts
Sig numbers are with 9" cone and Flowmaster catback.

*edit for more info/
T=83.5 F, ABP=29.23 Hg., CF=1.04
STD Numbers: 404.4/383.9
Absolute SAE: 397.2/377.1
 

·
Night Trains Daddy
Joined
·
1,569 Posts
JLP CAI
Magnaflow X w/cats
Mac 3" catback
2.93
Metco Idler
Computer Flash by www.apten-us.com

455/472 SAE

7.9 @ 92 1/8th

12.07 @ 118 1/4

Live axle, bassani catback going on soon.
:blob
 

·
Registered
Joined
·
57 Posts
Jimmy

This is the type of post that is really useful if everyone is honest. I have nothing to share but will in about a month. I will dyno with my current mods and then after the longtubes. Stock I was 376 rwhp, 366 rwtq SAE.
 

·
The Ubiquitous Jimmy V.
Joined
·
3,323 Posts
Discussion Starter · #17 ·
BAD PNY said:
Jimmy

This is the type of post that is really useful if everyone is honest. I have nothing to share but will in about a month. I will dyno with my current mods and then after the longtubes. Stock I was 376 rwhp, 366 rwtq SAE.
I think most guys are honest..The dyno's are a little different..Also we need to post weather numbers are STD or SAE so we can narrow things down..
Track times are also a bit scewed by driver's talant,weather and tires used.
The more info posted the better..
 

·
Snake Charmer
Joined
·
2,830 Posts
bassani catted X
bassani cat back
JLP CAI

388rwhp
377ft/lbs torque

I beleive these are std numbers.
 

·
Registered
Joined
·
684 Posts
Flowmaster Cat Back
MAC off road H pipe
9" K&N Filter (open cone directly on MAF, no heat shield)

412 rwhp, 375 tq, [email protected]
(STD numbers)

Flowmaster Catback
MAC off road H pipe
Morpheus Horsepower pipe (pics coming)

425 rwhp STD
415 rwhp SAE
no 1/4 times yet
 
1 - 20 of 25 Posts
Top