Mustang and Ford Performance Forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter · #1 ·
[email protected] 1/4

1.9 60' on the Nitto's @ 12 PSI

9.0 1/8th (best last year on old 5 spd was 8.9)

11.7 1000' (best last year on old 5 spd was 11.6)

This was in the Ozarks at a 1200-1500 above sea level

Too many mods to list!!
 

·
Registered
Joined
·
138 Posts
What are your mods
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #4 ·
Mods are:

WMS Velocity Tube
Pro M 87mm MAF
BBK 70mm TB
Steeda Pullies
Steeda Timing Adj.
99 GT Heads w/ a VERY crappy port job
99 GT Cams
99 GT Intake
T-56 6 speed
FMS 4.30's

I removed the front sway bar and FINALLY dipped sub 2.0's in the 60'

I raced a 99 Cobra w/ exhaust and gears, he went 13.5 to my 13.9
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #6 ·
Should be.. The installer said my heads were the worst port job he's ever seen
 

·
Registered
Joined
·
518 Posts
Dang, I was under the impression you were running stock 96 Heads. Well there has to be a little bit more in that set-up.




Brandon
 

·
Registered
Joined
·
36 Posts
How do you like that 6-speed? Also if you dont mind me asking how much did it cost you tranny and install for the 6-speed and how much for the 99+ heads and cam, install and all?

Thanks
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #9 ·
I seriously was driving the snot out of the car and know it might have .1 or .2 left but nothing major

I paid 1300 for the headswap kit.. Came Ported and Polished with cams and intake and timing chains

I paid 300 for the install

I paid $2300 for Tranny, Crossmember, pro 5.0

I paid 250-300 for the install

I also had to pay $75 to have my driveshaft shortened

I love the T-56, and I love the 4.30's

Just wish I had a cobra motor to push it somewhere ;)
 

·
Registered
Joined
·
138 Posts
I am thinking with that setup you should be around 13.2 or so since you actually have a little more power than a stock 99+ and also 4:30 gears. Of course I have not been to the track yet so I shut up
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #11 ·
The reason I have 4.30's is to compensate for the T-56

With 3.73's when I dropped the 56 in my times slowed nearly 1/2 a second.. Through in the 4.30's and now I'm back to when I had 3.73's..

Though the 4.30's are actually like having 4.10's with a T-45.

I bet the car puts out 230 RWHP on a dynojet and 290 RWTQ.. I'm pulling it all of soon to get reworked anyways though :p
 
1 - 14 of 14 Posts
Top