Mustang and Ford Performance Forums banner

1 - 3 of 3 Posts

·
Yes...it can be done
Joined
·
3,140 Posts
Discussion Starter · #1 · (Edited)
Kooks longtubes:


Slip on collectors with locking bolts/nuts:


Numbered primary tubes with Kooks emblem:
 

·
Yes...it can be done
Joined
·
3,140 Posts
Discussion Starter · #2 · (Edited)
Hey guys! Got the digital camera up and going as promised. :cool: Still looking for a different lift for the installation, I'll get her up there one way or another.

As I've said before, I'll be making my step-by-step installation guide for the 1-5/8". I don't know if it will be the shortest distance between two points, but the guide will provide good information at a minimum.

I'm thinking about adding lock washers or replacing the nuts with Nylock nuts to prevent the collectors from rattling loose. However, I haven't used Nylock nuts in a situation where excessive heat is involved. I had to tighten the bolts/clamps on my Magnaflow exhaust a few times after the install.

I'll keep everyone posted. :smoker:
 
1 - 3 of 3 Posts
Top