Mustang and Ford Performance Forums banner
1 - 5 of 5 Posts

·
Banned
Joined
·
1,265 Posts
Discussion Starter · #1 ·
I just ordered a buch of parts from amazon including the interchangable 2.76&2.93 pullies,belts,idlers(3)AND NGK TR6 plugs.

What is the best GAP for these pullies and should i re gap them when i put the 2.76 on at the track?
 

·
The Ubiquitous Jimmy V.
Joined
·
3,323 Posts
BLWN03 said:
I just ordered a buch of parts from amazon including the interchangable 2.76&2.93 pullies,belts,idlers(3)AND NGK TR6 plugs.

What is the best GAP for these pullies and should i re gap them when i put the 2.76 on at the track?
With the 276 pulley i'd use 32..with 293 35 will be ok..
 

·
Registered
Joined
·
108 Posts
Jim, i've got a 2.75 pully with a 100mm idler, NGK TR6, i was told to gap it at 35, 36, and 38.
Now you said 32, man i'm so lost......lmao
Could you say that again just so i know it's right.....thanks for your time
 
1 - 5 of 5 Posts
Top