Mustang and Ford Performance Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
I installing my V2SQ on my 01 GT this sunday and wanted to know if there is anything I should watch out for, do,etc...stuff people have encountered during the install or the time they have had the blower.

Things I have heard are as follows, please comment, add, etc...

1. Trimming the rad support so it does not dig into the powerpipe rubber

2. Trimming the rubber boot on the powerpipe where it connects to the maf for more clearance

3. Where the K&N rests in the fender, Vortech calls for you to cut a piece out...people have said to leave it in so if u get stick driving in water, the filter wont be exposed and suck up water
 

·
Registered
Joined
·
1,497 Posts
Sounds like you are on top of things to me. Forget the Procharger :rolleyes: You are on the right track :D
 
1 - 4 of 4 Posts
Top